|
|
SINGLE PORT PRESSURE CALIBRATOR
|
|
BetaGauge 301
Pressure calibrator.
The BetaGauge 301 is a general purpose,
value oriented pressure calibrator.
With one internal pressure range and an available adapter for external
BetaPort–P pressure modules,
the possibilities are extensive.
The available internal sensor ranges are:
1, 5, 30, 100 and 300 PSI. Note: 30 and 100 PSI ranges are calibrated
from -12 PSI to full scale.
|
Single Port Pressure Calibrator |
| Our
Price: |
Contact us for
pricing |
| Phone:
|
253-927-6186
866-318-6186 |
| Fax:
|
253-927-6189 |
| email:
|
sales@hotektech.com |
|
|
|
|
|
|
|
-
Display can be configured
to display up to 3 inputs simultaneously (i.e. pressure 1,
pressure 2, and RTD or any combination of inputs)
-
Ideal for gas flow
calibration (custody transfer) applications
-
Switch test on Pressure
1, Pressure 2, or external pressure module
-
Operating mode layers
support simple measurements to complex applications
-
Up to five frequently
used setups to be stored; last setup automatically recalled
on
power-up
-
% Error and damping
functions
-
Small, rugged compact
design operates on four (4) standard AA batteries
|
|
Specifications
(18°C to 28°C
unless otherwise noted) |
|
|
Ranges |
| Available Pressure |
1 psi, 5 psi, 30, psi, 100 psi, 300
psi, |
| mA |
0 to 24.000 mA |
| Volts |
0 to 30.000 VDC |
|
Engineering
Units |
psi, bar, mbar, kPa,
MPa, kgcm2,
cmH2O@4°C, cmH2O@20°C,
mH2O@4°C, mH2O@20°C,
inH2O@4°C, inH2O@20°C,
inH2O@60°F, mmHg@0°C,
inHg@0°C, ftH2O@4°C,
ftH2O@20°C, ftH2O@60°F + user
defined unit |
|
Accuracy |
|
Pressure |
±0.05% F.S.; for all ranges |
|
mA |
±0.015% of rdg±0.002mA |
|
Volts |
±0.015% of reading ±0.002V |
|
Temperature Compensation |
18°C to 23°C |
|
Temperature
Range |
| Operating |
-10
to +55 °C |
| Storage |
-20
to +60 °C |
|
Power
Requirements |
| Battery |
6
VDC, 4 AA cells required; included |
|
|
