|
|
PRESSURE CALIBRATOR MANOMETER |
|
|
T140 Pressure
Calibrator Manometer
|
|
|
T140 Pressure
Calibrator.
T140 Pressure
Calibrator is available in several ranges — ±10" H2O, ±200" H2O, and 30,
100, 300, and 3,000 PSI. Operation of these calibrators is made easy
through the use of a sealed membrane keypad with simple controls. When
combined with a MECP-100 Hand Pump, the T140 Pressure Calibrator Kit makes a great
package to handle your pneumatic calibration requirements.
|
Pressure Calibrator
|
-
High
Accuracy gauge differential capability
-
Rugged,
dust tight, water resistant case
-
Isolated
SS sensors on 300 PSI and
3000 PSI units
-
Easy to
read Super-Twist LCD
-
Intuitive
controls make operation easy
even for infrequent users
-
Powered
by a common 9 volt battery
|
|
|
|
|
Pressure Calibrator
Specifications
(1 year at 23 °C ±5 °C; % of reading unless otherwise noted) |
|
| Ranges |
-15.00
to 30.00 PSIG/PSID
-15.00 to 100.0 PSIG/PSID
300.0 PSIG
3000 PSIG
±10"
H2O
±200"
H2O (0 - 7 PSI) |
| Accuracy
18
°C
to 28 °C |
±10"
H2O ±0.1% of FS
±200" H2O ±0.05% of FS
30 PSI ±0.05%
of FS
100 PSI ±0.05% of FS
300 PSI ±0.05% of Rdg ±2 LSD
3,000 PSI ±0.05%
of Rdg ±2 LSD |
| Resolution |
±10"
H2O 0.001" H2O
±200"
H2O 0.01" H2O
30 PSI 0.001 PSI
100 PSI and 300 PSI 0.01 PSI
3,000 PSI 0.1 PSI |
| Engineering
Units |
PSI,
inH2O, cmH2O, mmH2O, mH2O, FtH2O, mBAR,
BAR, inHg, mmHg, cmHg, kPa, kg/cm2, TORR, ATM |
| Temperature
Stability |
±0.01%
FS/°C;
0 °C
to 18 °C,
and 28 °C
to 50 °C |
| Maximum
Overpressure |
Ranges >100 PSI
2x
Ranges <30 PSI 3x |
| Ports |
Two
1/8"
FNPT |
| Media |
30/100 PSI, 10" H2O, 200" H2O non-corrosive gas or
liquids
300/3,000 PSI all media |
| Environmental |
Operating temperature 0 °C
to 50 °C
Storage temperature -20 °C
to +60 °C |
| Mechanical |
Dimensions, without boot 5.7" H x 3.5" W
x 1.43" D (144.7 x 80.0 x 36.3 mm)
Weight 14 ounces (396 gms.) |
| Power
Requirements |
1,
9 Volt alkaline battery |
|
|
|
|
Ordering information |
|
|
T-140-10” Pressure Calibrator/Manometer; ±10”
H 2O
T-140-200” Pressure Calibrator/Manometer; ±200” H2O
T-140-30 Pressure Calibrator/Manometer; -14 to 30 PSI
T-140-100 Pressure Calibrator/Manometer; -14 to 100 PSI
T-140-300 Pressure Calibrator/Manometer; -14 to 300 PSI
T-140-3000 Pressure Calibrator/Manometer; -14 to 3000 PSI
MECP-100 Hand Pump; -14 to 100 PSI
MECP-500 Hand Pump; -14 to 500 PSI
MECP-3000 Hand Pump; -14 to 3000 PSI
T-140-XK Pressure Kit
Kit contains T-140 Calibrator, Hand Pump
for selected range, fittings and connectors, rugged carrying case, 9
V battery, and NIST traceable certificate. Replace X with
Calibrator/Manometer Range as shown above (i.e. 300 for 300 PSI).
|
|
