POWER CURRENT ENERGY VOLTAGE FREQUENCY PHASE ANGLE TRANSDUCERS

SINEAX M 563 Power Current Programmable Transducer

For simultaneously acquiring 3 freely selectable measured quantities in electrical systems. 
Equipped with 3 electrically isolated current outputs.
3 analog out, RS232, for heavy current quantities Interface RS232.

• 3 analogue outputs
• Application (system) programmable
• Rated current 1 to 6 A programmable
• Rated voltage 57 to 400 V (phase-to-neutral) or 
  100 to 693 V (phase to phase) programmable
• Universal analogue outputs (programmable)
• High accuracy: class 0.5
• Software with password protection for programming, data analysis, power system status simulation, acquisition of meter data and making settings
• DC, AC power pack with very large tolerance range
• Mounting: For snapping onto top-hat rail

SINEAX DME 400 Programmable Transducer

Programmable. multi-transducer, 4 energy meters, RS232, LON
Programmable multi-transducer for querying up to 47 measured quantities in heavy current systems
4 energy meters, RS232, LON

• Accurate measurement (class 0.2) of voltage and current, active, reactive and apparent power, power factor and frequency, as well as special current functions (bimetallic, slave pointer, mean value with or without preceding plus or minus sign)
• Current to 10 A, voltage to 830 V
• 4 programmable energy meters for Ah, kVAh, kWh and kvarh
• AC-DC power pack with large tolerance range, or AC only
• User-friendly customer software
• Top-hat rail or wall mounting

SINEAX DME 401 Programmable Transducer

Programmable multi-transducer, 4 energy meters, RS232, RS485-MODBUS
Programmable multi-transducer for querying up to 47 measured quantities in heavy current systems
4 energy meters, RS232, RS485-MODBUS

• Data transfer via MODBUS interface
• 4 programmable energy meters for Ah, kVAh, kWh and kvarh
• Programmable application (type of electrical system)
• Current to 10 A, voltage to 830 V
• Accuracy: 0.2% (under reference conditions)
• Password protected software for programming, 
  data analysis and simulation
• AC-DC power pack with large tolerance range
• Top-hat rail or wall mounting

SINEAX TRANSDUCERS ACTIVE POWER CURRENT VOLTAGE PHASE FREQUENCY 

SINEAX DME 406 Energy Programmable Transducer

Programmable multi-transducer, 4 energy meters, RS232 and PROFIBUS
Programmable multi-transducer for querying up to 47 measured quantities in heavy current systems
4 energy meters, RS232 and PROFIBUS

• Bus connection per EN 50 170
• 4 programmable energy meters for Ah, kVAh, kWh and kvarh
• Programmable application (type of electrical system)
• Current to 10 A, voltage to 830 V
• Password protected software for programming, 
  data analysis and simulation
• AC-DC power pack with large tolerance range, or AC only
• Top-hat rail or wall mounting

SINEAX DME 408 Programmable Transducer

Programmable Multi-Transducer, 4 energy meters, RS232 and ethernet interface
Programmable multi-transducer for the acquisition of up to 51 measurements in a heavy-current power system. The DME 408-Ethernet provides to the user all necessary information for energy consumption control. Beside the present measurements, meter contents and 15-min-values (trend and history for 24 h) may be requested. 
Via 32 configurable trip points minimum/maximum values can be monitored. If violated E-Mails will be sent to up to 5 recipients. 
The visualization of data (with cyclically refresh) can be performed using a standard WEB browser. All measured data may be acquisited using ftp as well.
4 energy meters, RS232 and ethernet interface

• Web server: communication via Ethernet / Intranet / Internet
• Energy consumption analysis and monitoring
• Remote monitoring of energy via www
• Limit value / alarm via e-mail
• 15‘ mean value with time stamp and archiving
• Trend analysis of the 15‘ mean values
• TCP/IP, FTP, SMTP and HTTP
• High accuracy measurement (class 0.2) of voltage, current, active, reactive and apparent power, power factor, frequency, as well as special current functions (bimetal, slave pointer and signed or unsigned average value
• Current 1 up to 6 A, voltage up to 693 V (line-to-line)
• 4 programmable power meters Ah, kVAh, kWh and kvarh
• AC-, DC-power pack with wide power supply 
  tolerance or AC power supply only
• User friendly application software
• Top-hat rail or wall mounting

SINEAX DME 440 Programmable Transducer

Programmable multi-transducer, 4 energy meters, 4 analog out, RS232, RS485-MODBUS
The programmable multi-transducer simultaneously acquires several quantities in heavy current systems and processes them into 4 analog output quantities.
The MODBUS interface allows for querying up to 47 measured quantities.
4 energy meters, 4 analog out, RS232, RS485-MODBUS

• 4 analog outputs
• 4 programmable energy meters for Ah, kVAh, kWh and kvarh
• Programmable application (type of electrical system)
• Current to 10 A, voltage to 830 V
• Programmable universal analog outputs
• Accuracy: U / I 0.2 %, P 0.25 % under reference 
  conditions
• Password protected software for programming, 
  data analysis and simulation
• AC-DC power pack with large tolerance range
• Housings:
  SINEAX: top-hat rail or wall mounting
  EURAX: plug-in module for 19" rack

SINEAX DME 424 Energy Programmable Transducer

Programmable multi-transducer, 4 energy meters, 2 analog in, 4 digital out, RS232
Programmable multi-transducer for simultaneously acquiring several quantities in heavy current systems. The output quantities of the analog outputs can be configured as load-independent direct current or direct voltage signals.
The digital outputs are suitable for limit value monitoring or energy metering.
4 energy meters, 2 anlog in, 4 digital out, RS232

• With 2 analog and 4 digital outputs
• 4 programmable energy meters for Ah, kVAh, kWh and kvarh
• Programmable application (type of electrical system)
• Current to 10 A, voltage to 830 V
• Programmable universal analog outputs
• Accuracy: U/I 0.2%, P 0.25% under reference conditions
• Universal digital outputs: meter transmitter, limit values
• Password protected software for programming, 
  data analysis and simulation
• AC-DC power pack with large tolerance range, 
  or AC only
• Housings:
  SINEAX: top-hat rail or wall mounting
  EURAX: plug-in module for 19" rack

SINEAX DME 442 Energy Programmable Transducer

Programmable multi-transducer, 2 energy meters, 4 analog in, 2 digital out, RS232
Programmable multi-transducer for simultaneously acquiring several quantities in heavy current systems. The output quantities of the analog outputs can be configured as load-independent direct current or direct voltage signals.
The digital outputs are suitable for limit value monitoring or energy metering.
2 energy meters, 4 analog in, 2 digital out, RS232

• With 4 analog and 2 digital outputs
• 2 programmable energy meters for Ah, kVAh, kWh and kvarh
• Programmable application (type of electrical system)
• Current to 10 A, voltage to 830 V
• Programmable universal analog outputs
• Accuracy: U/I 0.2%, P 0.25% under reference conditions
• Universal digital outputs: meter transmitter, limit values
• Password protected software for programming, 
  data analysis and simulation
• AC-DC power pack with large tolerance range, or AC only
• Housings:
  SINEAX: top-hat rail or wall mounting
  EURAX: plug-in module for 19" rack