EFTC 30 BURST TRANSIENT GENERATOR

EFTC 30 Burst Transient Generator

EFTC 30 Burst Fast Transient Generator, normally referred to as burst generator only, is a part of the immunity standards described by the International Electronic Commission (IEC). 
The IEC 1000-4-4 standard specifies a method of establishing a common and reproducible basis for evaluating the performance of electric and electronic equipment when subjected to repetitive fast transients. 

  • Conforms to IEC 1000-4-4, IEC 801-4 and
    draft for the new standard
  • Burst voltage 0.2 to 4.4 kV
  • Frequency range 500 Hz to 1.0 MHz
  • User friendly menu based operation
  • Programmable sequences
  • Library with test levels
  • 24 user memories
  • Trig input for analyze purposes
  • Output for control of external network
    (CDN 30 series)
  • Possibility of control via RS 232 optical fiber
    (option) and Windows software
    for use with coupling networks CDN 31 and
    CDN 33 or coupling clamp CCS 30

For price and info please email sales@hotektech.com or call 253-927-6186 ext. 1

Related Instruments ESD Discharge Simulator
EFTC Burst Generator
Coupling Networks, Clamps
Nondestructive Test

The EFTC 30 Burst generator combines the advantages of a portable test system and a powerful controller with full size user interface. The user friendly operation of the EFTC 30 continues the new standard for user interface set by the ESDC 30 series of ESD generators.
The EFTC 30 Burst generator surpasses the IEC 1000-4-4 (IEC 801-4) in every aspect and meets the forthcoming proposal for the revised standard.
A range of unique features enables the user to both analyze fault situations of the EUT, and to produce a full compliance test according to the IEC standards.
Low weight and carrying handles on both the EFTC 30 and the CDN 30 series ensures portability and complete freedom of use.
In order to make the optimal system choice the generator has no built-in mains coupling network. 
A choice of external relay controlled coupling networks, CDN 31 (16A, 1 phase) or CDN 33 (16A, 3 phases) are available.

Conforms to IEC 1000-4-4 and IEC 801-4

Burst Output  
Burst voltage (open circuit) 0.2 to 4.4 kV, in 0.05 / 0.1 kV steps
Polarity Positive and negative
Voltage tolerance < ±5 %
Impedance 50 ohms ± 20 %
Rise time 5 ns ± 30 %
Duration 50 ns ± 30 %
Coupling capacitor 10 nF
Adjustment range  
Frequency 500 Hz to 1.0 MHz in 56 steps
Interval 5 ms to 1000 ms
Duration Freq. depending, e.g. 200 us to 30 ms at 5 KHz
Max. number of pulses 50 pulses / Burst, 500 pulses / sec
Phase angle Synchronic (trig menu), asynchronic (normal menu)
Delay (trig menu) 0 ms to 100 ms
   
Visual indication Graphical LCD display (B/W) with back light
Controls 4 soft keys plus Up, Down, Return, Trig and On/Off keys
Inputs Optical input and 9 pin D-sub controlling the fail/stop function.
Control output 12 pin connector to CDN.
High voltage output High voltage Fischer coax to CDN or clamp.
Memory E²PROM for storing vital data and 24 user memories
Power Mains input 115/230/240 V AC max. 50 VA.
Dimensions 240 x 265 x 145 mm
Weight 5.5 kg

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.


[Home] [Compliance] [Top] [Distribution] [Contact Us]