LCR CAPACITANCE TESTER BRIDGE

DB232 Component Capacitance CLR Bridge Tester is especially designed for high accuracy testing of capacitors on production lines, not least for integration with sorting machines in a production environment. 
The instrument is reliable, user-friendly and easy to set up to any test.

Component Capacitor CLR Bridge Tester

The DB232 utilizes a well-proven input protection system to protect the bridge module from damages 
owing to exposure to charged capacitors. 
This secures that the DB232 does not break down as easily as other LCR bridges, when exposed to charged capacitors.

The DB232 Component Capacitor CLR Bridge Tester can perform dual frequency tests at any combination of frequencies. 
A popular configuration is to test capacitance at 1kHz and loss factor at 100kHz.
As standard, it can sort capacitors into bins according to the measured parameters at two frequencies simultaneously.

Bin sorting with up to 12 bins for capacitance for 1^st frequency and up to 4 bins for tan d using 2^nd frequency. Or tan d may be measured at several frequencies using the 4 bins for different levels of the dissipation factor.

As standard the instrument has a built-in comparator for deviation measurements, IEEE488 (GPIB) and RS232C data interfaces as well as handler interface (opto-coupler type).
All measured data are collectable from the data interfaces.

Via the PCMCIA slot it possible to easily store set-ups to distribute to other instruments quickly, without operator mistakes.

*Accuracy ± 0,2pF
**Accuracy ± 1pF. The above specifications require a stable jig with capacitance lower than 30pF

The above specifications are valid for measurements with constant voltage