THERMOHYGROMETER 

HD2101.1 Thermohygrometer. Temperature range –200°C +650°C, humidity 0,0…100,0% RH.
Storage of maximum, minimum, average value, RS232 C output for data transfer in real time to a PC or printer.
HD2101.2 Thermohygrometer. Temperature range –200°C +650°C, for humidity 0,0…100,0%RH. Datalogger stores the maximum, minimum, average value and can store up to 80.000 samples.
RS232 C/USB output for data transfer in real time to a PC or a printer.

The HD2101.1 and HD2101.2 are portable instruments with a large LCD display.
They measure relative humidity and temperature using a Pt100 sensor or thermocouple humidity temperature combined probe. Temperature only is measured by immersion, penetration or contact probes. The sensor can be a Pt100, Pt1000 or Ni1000.

Measurement of relative humidity by Instrument
Measurement range 0…100%RH
Resolution 0.1%RH
Accuracy ±0.1%RH
Drift after 1 year 0.1%RH/year
Measurement of temperature by Instrument
Pt100 measurement range -200…+650°C
Pt1000 measurement range -200…+650°C
Ni1000 measurement range -50…+250°C
Resolution 0.1°C
Accuracy ±0.1°C
Drift after 1 year 0.1°C/year

The HD2101.1 and HD2101.2 models are fitted with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer.

ORDER CODES

HD2101.1K: The kit is composed of the instrument HD2101.1, combined probe
HP472AC, connection cable for serial output HD2110CSNM, 4 1.5V alkaline
batteries, operating manual, case and DeltaLog9 software.
HD2101.2K: The kit is composed of the HD2101.2 datalogger, combined probe
HP472AC, connection cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software.
HD2110CSNM:  8-pole connection cable MiniDin - Sub D 9-pole female for
RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9:  Software for download and management of the data on PC using
Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S’print-BT: On request, portable, serial input, 24 column thermal printer, 58mm
paper width.

RELATIVE HUMIDITY AND TEMPERATURE PROBES

HP472AC: Combined probe %RH and temperature, dimensions 26x170mm. Connection cable length 2 metres.
HP572AC: Combined probe %RH and temperature - thermocouple K sensor.
Dimensions Ø 26x170mm. Connection cable length 2 metres. HP473AC:
Combined probe %RH and temperature.
Handle dimensions 26x130mm, probe 14x110mm. Connection cable length 2 metres.
HP474AC: Combined probe %RH and temperature. Handle dimensions 26x130mm,
probe 14x210mm. Connection cable length 2 metres.
HP475AC: Combined probe %RH and temperature. Connection cable length
2 metres. Handle 26x110mm. Stainless steel stem 12x560mm. Point 13.5x75mm.
HP477DC: Combined sword probe %RH and temperature. Connection cable length 2 metres. Handle 26x110mm. Probe’s stem 18x4mm, length 520mm.