DIGITAL MANOMETER THERMOMETER 

HD 2114.0 Micro manometer-Thermometer with 20mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Storage of maximum, minimum, average value. Functions: REL, HOLD.
HD 2114.2 Micro manometer-Thermometer with 20mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Storage of maximum, minimum, average value. Datalogger which stores the maximum, minimum, average value and can store up to 36.000 couples of samples. RS232 C/ USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can disabled, IP 67 protection degree.

These are portable instruments with a large LCD display. They measure absolute, relative and differential
pressure, as well as temperature.
Pressure is measured using an internal module which is differential with respect to the atmosphere with fixed full scale.

With the PP471 module acting as an interface, the instrument can use all the TP704 and TP705 series probes to perform the measurements.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Operating temperature -5…50°C
Warehouse temperature -25…65°C
Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power
Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Mains - model HD2114P.2 Output mains adapter 9Vdc / 250mA
Units °C - °F - Pa - mbar - mmH2O - PSI - m/s - km/h - ft/m - mph - knot - l/s - m3/h - cfm

ORDER CODES
HD2114.0K: The kit is composed of the HD2114.0 with built-in 20mbar full scale probe, 4 1.5V alkaline batteries, operating manual, case. Other probes must be ordered separately.
HD2114.2K: The kit is composed of the HD2114.2 datalogger with built-in 20mbar full scale probe, connection cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. Other probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using
Windows 98 to XP operating systems.
PW: Extension with male-female standard miniature connectors to connect the
Pitot tube’s thermocouple K to the instrument, length 2m.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S’print-BT: On request, portable, serial input, 24 column thermal printer, 58mm
paper width.