HD2127.1K Centesimal thermometer in the range +/-199,99°C, decimal outside this range, Pt100 sensor for input of probes with SICRAM module, two inputs, large display, measuring range –200°C +650°C. Storage of maximum, minimum, average value and the difference between the two inputs, RS232 C output for data transfer in real time to a PC or printer.
Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.
HD2127.2K Centesimal thermometer in the range +/-199,99°C, decimal outside this range, Pt100 sensor for input of probes with SICRAM module, two inputs, large display, measuring range -200°C +650°C. Datalogger which stores maximum, minimum, average and can store up to 32.000 couple of samples. RS232 C/USB output for data transfer in real time to a PC or printer.
Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

The HD2127.1 and HD2127.2 are thermometers
with two inputs and a large LCD display.
They measure the temperature using immersion, penetration, contact or air probes.
The instruments accept input from probes with
SICRAM module and Pt100 sensor or probes
with direct 4 wire Pt100 sensor.

The Pt100 probes are fitted with SICRAM module
and the factory calibration settings are already
memorized inside.
Upon turning on the instrument automatically
detects them.
 

The HD2127.2 instrument is a datalogger.
It memorizes up to 32,000 pairs of data which can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0.
The storing interval, printing, and baud rate can be configured using the menu.
The HD2127.1 and HD2127.2 models are fitted with an RS232C serial port and can transfer the acquired measurements to a PC or to a portable printer in real time.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions
(Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Working temperature -5…50°C
Storing temperature -25…65°C
Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power
Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Mains Output mains adapter 9Vdc / 250mA
Measuring units °C - °F - °K
Measurement of temperature by Instrument
Pt100 measurement range -200…+650°C
Pt1000 measurement range -200…+650°C
Ni1000 measurement range -50…+250°C
Resolution 0.01°C in the range ± 199.99°C
0.1°C in the remaining field
Accuracy ±0.01°C
Drift after 1 year 0.1°C/year

ORDER CODES
HD2127.1K: The kit is composed of the instrument HD2127.1, connection cable
for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual,
case and DeltaLog9 software. The probes must be ordered separately.
HD2127.2K: The kit is composed of the HD2127.2 datalogger, connection
cable HD2101/USB, 4 1.5V alkaline batteries, operating manual, case and
DeltaLog9 software. The probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using
Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S’print-BT: On request, portable, serial input, 24 column thermal printer, 58mm
paper width.
Probes complete with SICRAM module
TP472I: Pt100 sensor immersion probe. Stem Ø 3 mm, length 300 mm.
Cable length 2 meters.
TP472I.0: Pt100 sensor immersion probe. Stem Ø 3 mm, length 230 mm.
Cable length 2 meters.
TP473P.0: Pt100 sensor penetration probe. Stem Ø 4mm, length 150 mm.
Cable length 2 meters.
TP474C.0: Pt100 sensor contact probe. Stem Ø 4mm, length 230mm, contact
surface Ø 5mm. Cable length 2 meters.
TP475A.0: Pt100 sensor air probe. Stem Ø 4mm, length 230mm.
Cable length 2 meters.
TP472I.5: Pt100 sensor immersion probe. Stem Ø 6mm, length 500 mm.
Cable length 2 meters.
TP472I.10: Pt100 sensor immersion probe. Stem Ø 6mm, length 1,000mm.
Cable length 2 meters.
TP49A: Pt100 sensor immersion probe. Stem Ø 2.7 mm, length 150 mm.
Cable length 2 meters. Aluminum handle.
TP49AC: Pt100 sensor contact probe. Stem Ø 4 mm, length 150 mm.
Cable length 2 meters. Aluminum handle.
TP49AP: Pt100 sensor penetration probe. Stem Ø 2.7 mm, length 150 mm.
Cable length 2 meters. Aluminum handle.
TP875: Globe thermometer Ø 150 mm with handle, complete with SICRAM
module. Cable length 2 meters.
Temperature probes without SICRAM module
TP47.100: Direct 4 wire Pt100 sensor immersion probe. Probe’s stem Ø 3mm,
length 230mm. 4 wire connection cable with connector, length 2 meters.
TP47.1000: Pt1000 sensor immersion probe. Probe’s stem Ø 3mm, length
230mm. 2 wire connection cable with connector, length 2 meters.
TP47: Only connector for probe connection: direct 4 wire Pt100, 2 wire Pt1000
and Ni1000.