DIGITAL MANOMETER THERMOMETER 

HD 2134.0 Micro manometer Thermometer with 200mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C.
Storage of maximum, minimum, average value.
Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.
HD 2134.2 Micro manometer Thermometer with 200mbar built-in sensor, input for SICRAM module PP471 to connect probes TP704 and TP705 series. Temperature measurement with Pt100 probe complete with SICRAM module, measuring range -200°C +650°C. Datalogger which stores maximum, minimum, average value and can store up to 36.000 couples of samples. RS232 C/ USB output for data transfer in real time to a PC or printer.
Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

The HD2134.2 instruments are data loggers.
They memorize up to 36,000 samples which can be transferred from the instrument connected to a
PC via the multi-standard RS232C serial port and USB 2.0.
The storing interval, printing, and baud rate can be configured using the menu.
They are also fitted with an RS232C serial port and can transfer the acquired measurements to a PC or
to a portable printer in real time.
The Max, Min and Avg function calculates the maximum, minimum or average values.
The Peak function can be activated with external probes connected to the module PP471 and
detects the presence of pressure peaks.

Other functions include: the relative measurement REL,  the HOLD function, and the automatic turning off which can also be disabled.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries)
Materials ABS, rubber
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Working temperature -5…50°C
Storing temperature -25…65°C
Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power
Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Measuring unit °C - °F - Pa - hPa - kPa - mbar - bar - atm - mmHg - mmH2O - kgf/cm2 - PSI - inchHg

ORDER CODES
HD2134.0K: The kit is composed of the HD2134.0 with built-in 200mbar full
scale probe, 4 1.5V alkaline batteries, operating manual, case.
Other probes must be ordered separately.
HD2134.2K: The kit is composed of the HD2134.2 datalogger with built-in
200mbar full scale probe, connection cable HD2101/USB, 4 1.5V alkaline
batteries, operating manual, case and DeltaLog9 software.
Other probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using
Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S’print-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
PRESSURE MEASUREMENT PROBES
PP471: SICRAM interface module between instrument and TP704 and TP705
series Delta Ohm probes. Cable length 2 metres. The list of pressure
probes is outlined in the PP471 module technical data table.
TEMPERATURE PROBES COMPLETE WITH SICRAM MODULE
TP472I: Pt100 sensor immersion probe. Stem Ø 3 mm, length 300 mm.
Cable length 2 metres.
TP472I.0: Pt100 sensor immersion probe. Stem Ø 3 mm, length 230 mm.
Cable length 2 metres.
TP473P.0: Pt100 sensor penetration probe. Stem Ø 4mm, length 150 mm.
Cable length 2 metres.
TP474C.0: Pt100 sensor contact probe. Stem Ø 4mm, length 230mm, contact
surface Ø 5mm. Cable length 2 metres.
TP475A.0: Pt100 sensor air probe. Stem Ø 4mm, length 230mm.
Cable length 2 metres.
TP472I.5: Pt100 sensor immersion probe. Stem Ø 6mm, length 500 mm.
Cable length 2 metres.
TP472I.10: Pt100 sensor immersion probe. Stem Ø 6mm, length 1,000mm.
Cable length 2 metres.
TEMPERATURE PROBES WITHOUT SICRAM MODULE
TP47.100: Direct 4 wire Pt100 sensor immersion probe. Probe’s stem Ø 3mm,
length 230mm. 4 wire connection cable with connector, length 2 metres.
TP47.1000: Pt1000 sensor immersion probe. Probe’s stem Ø 3mm, length
230mm. 2 wire connection cable with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wire Pt100, 2 wire Pt1000
and Ni1000.