DIGITAL Pt100 THERMOMETER 

HD 2307.0K Thermometer, Pt100 sensor for input of probes equipped with SICRAM module,
measuring range –200°C +650°C. Storage of maximum, minimum, average value.
Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

The HD2307.0 is a portable instrument with a large LCD display.
It measures the temperature using Pt100 or Pt1000 immersion, penetration, contact or air probes.

The sensor can be a Pt100 3 or 4 wires, Pt1000.
The probes are fitted with an automatic detection module, with the factory calibration settings
already being memorized inside.
The Max, Min and Avg function calculate the maximum, minimum or average values.
Other functions include: the relative measurement REL, the HOLD function, and the automatic
turning off that can also be disabled.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions
(Length x Width x Height) 140x88x38mm
Weight 160g (complete with batteries)
Materials ABS
Display 2x41⁄2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Operating temperature -5…50°C
Warehouse temperature -25…65°C
Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power
Batteries 3 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Measuring unit °C - °F
Common characteristics
Resolution 0.1°C
Temperature drift @ 20°C 0.003%/°C

ORDER CODES

HD2307.0K: The kit is composed of the instrument HD2307.0, 3 1.5V alkaline
batteries, operating manual, case. The probes must be ordered separately.
Probes complete with SICRAM module
TP472I: Immersion probe, sensor Pt100. Stem Ø 3 mm, length 300 mm.
Cable length 2 meters.
TP472I.0: Immersion probe, sensor Pt100. Stem Ø 3 mm, length 230 mm.
Cable length 2 meters.
TP473P.0: Penetration probe, sensor Pt100. Stem Ø 4mm, length 150 mm.
Cable length 2 meters.
TP474C.0: Contact probe, sensor Pt100. Stem Ø 4mm, length 230mm, contact
surface Ø 5mm. Cable length 2 meters.
TP475A.0: Air probe, sensor Pt100. Stem Ø 4mm, length 230mm.
Cable length 2 meters.
TP472I.5: Immersion probe, sensor Pt100. Stem Ø 6mm, length 500 mm.
Cable length 2 meters.
TP472I.10: Immersion probe, sensor Pt100. Stem Ø 6mm, length 1000mm.
Cable length 2 meters.
TP49A: Immersion probe, sensor Pt100. Stem Ø 2.7mm, length 150mm.
Cable length 2 meters. Aluminum handle.
TP49AC: Contact probe, sensor Pt100. Stem Ø 4 mm, length 150mm.
Cable length 2 meters. Aluminum handle.
TP49AP: Penetration probe, sensor Pt100. Stem Ø 2.7mm, length 150mm.
Cable length 2 meters. Aluminum handle.
TP875: Globe thermometer Ø 150 mm with handle, complete with SICRAM
module. Cable length 2 meters.