 |
|
HD32.8. TEMPERATURE DATALOGGER 16 INPUTS |
|
|
|
HD32.8. Temperature
Datalogger 8 or 16 inputs |
|
|
HD32.8.8 Data Logger
Temperature with display. 8 inputs thermocouple types K, J, T, N, R, S,
B, E.
HD32.8.16 Data Logger Temperature with display. 16 inputs
thermocouple types K, J, T, N, R, S, B, E.
The HD32.8.8 and HD32.8.16 instruments are rugged data loggers.
The former has 8 inputs, the latter has 16 inputs. They work with
thermocouple probes type K, J, T, N, R, S, B and E with miniature
connector.
|
 |
-
Configurable
unit of measurement : °C, °F, °K.
-
Simultaneous
display of 4 inputs.
-
Maximum, minimum
or average of the logged values.
-
Selectable
storage interval: 2, 5, 10, 15, 30 seconds, 1, 2, 5, 10, 15, 20, 30 minutes
and 1 hour.
-
Data logging:
instantaneous or postponed,
with the possibility of selecting the recording
start and end time.
-
Data download:
RS232C, 1200...38400 baud or
USB 1.1 – 2.0.
|
|
|
|
|
|
|
|
|
-
Flash memory, organized in
64 blocks, for a total capacity of 800,000 recordings divided among the
existing inputs. The recording can be handled in two ways:
- when the available memory is full, the collected data are overwritten
starting from the oldest ones (circular memory),
- the recording stops when the available memory is full.
-
DeltaLog9 software, for data
download and processing.
-
LCD backlit graphic display
128x64 pixel.
-
Instrument setup through the
keyboard; no connection required to the PC.
-
Security password for
keyboard locking.
-
Power supply: 4 1.5V
alkaline C-BABY type batteries, external power supply
12VDC-1A or PC USB port.
-
Consumption @6VDC:
<60μA when the instrument is off
<60μA in sleep mode with all probes connected
<40mA during data logging with all probes connected
-
Use of the HD32.8.8 and
HD32.8.16 data loggers: in the field for complex machine or equipment
multi measurements, machine testing, pharmaceutical and food industry,
oven mapping,
air conditioning units, etc.
|
| Number of inputs |
8 for the HD32.8.8
16 for the HD32.8.16 |
| Connection |
Miniature female socket for thermocouple |
Instrument accuracy and
measurement range |
Tc: K -200 … +1,370°C / ±0.1°C up to
600°C ±0.2°C over 600°C
Tc: J -100 … +750°C / ±0.1°C up to 400°C ±0.2°C over 400°C
Tc: T -200 … +400°C / ±0.1°C
Tc: N -200 … +1,300°C / ±0.1°C up to 600°C ±0.2°C over 600°C
Tc: R +200 … +1,480°C / ±0.3°C
Tc: S +200 … +1,480°C / ±0.3°C
Tc: B +200 … +1,800°C / ±0.4°C
Tc: E -200 … +750°C / ±0.1°C up to 300°C ±0.2°C over 300°C |
| Resolution |
0.05°C in the range ±199.95°C
0.1°C in the remaining range |
| Temperature drift @20°C |
0.02%/°C |
| Drift after 1 year |
0.1°C/year |
| Internal watch accuracy |
1min/month max deviation |
| Unit of measurement |
°C, °F, °K |
| Display |
LCD backlit graphic display 128x64
pixel. |
| Keyboard |
15 keys; the instruments can be
configured
without a PC. |
| Keyboard locking function |
with password. |
| Memory |
Divided into 64 blocks. |
| Storage capacity |
Up to 800,000 recordings divided
among the existing inputs; for example
with one probe connected, 800,000
recordings; with 8 probes connected,
96,000 recordings each. |
| Security of stored data |
Unlimited. |
| Power supply |
4 1.5V alkaline C-BABY type batteries
External power supply 12VDC-1A. Connector,
external |
| Power absorbed @6VDC: |
<60μA when the instrument is off
<60μA in sleep mode with all probes
connected
<40mA during data logging with all
probes connected |
| Autonomy |
200 hours with 7800mAh alkaline
batteries,
with all probes connected |
| Data download |
RS232C from 1200 to 38400 baud,
galvanically
isolated. Sub D 9-pole male
connector.
USB 1.1 – 2.0 galvanically isolated. |
| Operating temperature |
-5 … 50°C |
| Working relative humidity |
0 … 90% RH without condensation |
| Protection degree |
IP64 |
|
|
|
|
|
