K THERMOCOUPLE SENSOR THERMOMETERS

The HD 9016 Digital Thermometer has the following built-in functions: Automatic cut-out after 8 minutes: AUTO POWER OFF Automatic change of scale: AUTORANGE. Relative measurements: REL.
Stores and displays the maximum and minimum temperature value at each input: REC, DATA CALL. Calculates the difference between the two inputs: A-B. Acoustic signal (beep) after pressing a key. 
Low battery signal (beep) every 30 seconds.

It is available with a large range of type K thermocouple probes in different shapes and configurations for many different applications.

Measuring range with thermocouples:

K: -200°C...+1370°C (CHROMEL - ALUMEL)
J: -100°C...+750°C (IRON - CONSTANTAN)
T: -200°C...+350°C (COPPER - CONSTANTAN)
E: -200°C...+750°C (CHROMEL - CONSTANTAN)
R: +200°C...+1480°C (PLATINUM - PLATINUM 13% RHODIUM)
S: +200°C...+1480°C (PLATINUM - PLATINUM 10% RHODIUM)
B: +200°C...+1800°C (PLATINUM 6% RHODIUM - PLATINUM 30% RHODIUM)

Inputs: 2
INSTRUMENT RANGE:
Thermocouple K: (-200°C...+1370°C)    
(-328°F +1999°F)
Thermocouple J: ( -100°C...+750°C)
(-148°C...+1382°F)
Thermocouple T: (-200°C...+350°C)
(-328°F...+662°F)
Thermocouple E: (-200°C...+750°C)     
(-328°F +1382°F)
Thermocouple R: (+200°C...+1480°C)
(+392°F...+1999°F)
Thermocouple S: (+200°C...+1480°C)
(+392°F...+1999°F)
Thermocouple B: (+200°C...+1800°C)
(+392°F...+1999°F)
Probe connections: 2 miniature thermocouple sockets K, compensated cold junction.
Resolution: +199.9°C (+199.9°F) 0.1°C
(0.1°F) +200°C (+200°F) 1°C (1°F)
Precision (instrument alone) with temperature from 18°C to 25°C: -20O°C....-50°C 0.4°C,
 -50°C....+200°C 0.2°C, 
+200°C.... +800°C 2°C
Influence of temperature in the instrument work range - 5°C...+18°C: +25°C...+50°C
-200°C....-50°C: 0.4°C +0.01 °C/°C,
 -50°C...+200°C: 0.2°C +0.01°C/°C,
+200°C... +800°C:

VC Conversion frequency: 
1 second
Instrument working temperature: 0...+50°C
Relative humidity: 0...90% R.H.
Instrument functions:
 Automatic change of scale, HOLD, automatic cut-out, MAX/MIN storage, relative measurements, difference between inputs, arrangement for serial output RS232C, selection of thermocouple type.
Serial output: RS 232 C, unidirectional, data transmission speed 300 baud. Connection by means of a connecting cable AD RS 232 C from SUB D female 9-pole to SUB D female 25-pole. Transmission of the displayed value at a fixed rate every 10 seconds.
Display: LCD 3 1/2 digit figure height 12.5 mm, symbols HOLD, RCD, REL, MAX, MIN, °C, °F, A, B, A-B.
Power supply: 9V battery IEC 6LF22.
Battery life: approximately 100 hours, alkaline battery.
Instrument weight: 280 gr.
Dimensions: 215x73x38 mm.