It was developed for precise measurements of nonmagnetic coating on ferrous surfaces.

The result of the measurement is displayed in w mm or mils (1/1000 inch).

MG-401 is used for measurements of varnish layers, isolating coatings or determining thickness of plastic foil laid on steel.

• High accuracy is ensured thanks very precise 16 
  point producer’s calibration of the probe.

• For unusual thickness of the basis 3 point calibration of the user on freely chosen 
  thickness points is possible.

• Memory of 3 characteristics of user’s calibration.

• Alarm function enables setting maximal and minimal value their exceeding is signalized 
  on the display.

• Built in clock with date.

• Internal datalogger enables storing up to 240 measurements with time and date.

• From the results stored in memory finding the maximal, minimal and average value is possible.

• Storing of the characteristics, calibration data and measurements results is in non-volatile memory.

• Possibility of connecting with a PC by RS-232 output or with standard printer by interface.

• Powered by 9V battery or 9V power adapter.

• 24 months warranty.