METRAMACHINE 439/5,4

MetraMachine 439/5,4 Test System for EN 60439-1 VDE 0660 Part 500
MetraMachine 439/5,4 Test System for EN 60439-1 VDE 0660 Part 500
Measuring system for the testing of low-voltage switchgear assemblies in accordance with EN 60439-1.

Consists of Profitest 204, Profitest 204 HV, Caddy 204, Signal 204 and Leadex 204


Test System for EN 60439-1 VDE 0660 Part 500
 

  • Clear-cut operating menus

  • Illuminated display

  • Two 4 m measurement cables (4-wire connection)

  • Remote control for efficient use

  • Limit value adjustment

  • Convenient memory and report generating functions

  • Data interfaces for PC and printer

  • Can be expanded for quick, on-site alphanumeric data entry and reports printing

  • Can be retrofitted for high-voltage testing

 

Applications

The PROFITEST 204 tester has been designed for quick, safe testing of electrical and electronic equipment and systems at machinery in accordance with DIN EN 60204-1 and VDE 0113 with nominal voltages of up to 1000 V.
The following periodic tests must be performed in accordance with the standard:
– Testing for continuity at connections within the protective conductor system with 10 A test current
– Insulation resistance test
– Voltage tests (optionally HP or HV)
– Testing for residual voltage

Beyond this, the following tests and measurements may be performed as well:
– Leakage current test
– Voltage measurement
– Frequency measurement

All values required for approval reports can be measured with this instrument.

Display
The LCD window consists of an illuminated dot matrix display at which menus, device settings and measurement results, as well
as online help can be displayed.

Help Key
Information regarding the current menu item can be queried with this key. 
Online help texts appears at the LCD window.

Function Selector Switch
Testing, report generating and data management functions are selected with the rotary switch.

Limit Values
Limit values can be assigned for use with each measurement, allowing for individualized 
adaptation of the various tests to prevailing local conditions, as well as to the latest requirements set forth in the standards.

Data Memory
Depending upon the number of systems for which data logging is performed (max. 254), up to 2800 measurements can be saved to memory.

Remote Control
The test probe with integrated control panel allows for remote control of protective conductor and insulation resistance measurements, as well as storage of the respective values to memory. 
Integrated lamps indicate measurement progress status.
All PROFITEST 204 operating functions can also be controlled via the RS 232 interface. 
Signal and display values can be remote queried as well.

RS 232 Interface for Printer and PC
This port provides for data transmission and the supply of electrical power to the optionally available SECUTEST PSI printer.
Other devices (e.g. a PC) can also be connected to this port with the help of an interface cable.

CENTRONICS Parallel Port
Any commercially available printer can be connected to this data interface (except for PostScript printers). Detailed report forms which have been uploaded to the instrument can be read out via this port.

Report Generating Functions
The following report generating functions are available:
– Read out measurement data to the integrated SECUTEST PSI printer (accessory)
– Upload report forms to the test instrument with the help of a PC and included PROTOCOL software
– Select one of three report forms stored to the instrument
– Read out measurement data via the CENTRONICS parallel port to commercially available printers
– Transmit measurement data to a PC and process with EXCEL

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [GMC] [Top] [Distribution] [Contact Us]