|
|
|
METRAwin
90-2 |
|
|
Calibration Software for METRAHit 18C and 28C |
|
The METRAHit
18C , METRAHit 28C hand-held
calibrators, in combination with the METRAHit
28S multimeter, can be transformed into a professional, PC-based
calibration system for measuring transducers, indicators and recorders
with METRAwin 90-2 software and an interface cable.
|
|
 |
Calibration
procedures are created with METRAwin.
The specified analog values are
transmitted via the BD232 adapter from the PC to the calibrator and
are fed to the device to be calibrated from the analog output at the
calibrator.
The analog output value from the device to be calibrated is then
measured by the multimeter, and is returned to the PC for evaluation
via the interface.
If the measurement results remain within the
specified tolerances, the subsequent calibration step is initialized
automatically until the entire procedure has been run.
Calibration data can be easily imported into other Windows
applications
(e.g. Word or Excel).
|
|
|
Important Features
included with METRAwin 90:
-
Simple software
control of the calibrator by means of direct data entry of
individual values.
-
Configuration
parameters are clearly displayed and easy to change.
-
Test programs can be
easily written with multiple sequence steps for complex devices
or systems components.
-
Calibrator-multimeter
test sequences can be generated in a device or measuring point
oriented fashion for the establishment of a computer aided
calibration system.
-
Digital, online
representation of measurement values in combination with an
interface
multimeter.
-
Test sequences can
be stored to electronic media.
-
Calibration
documentation in test report form including calibration data,
complete setpoint
versus actual value comparison, deviation etc. for each sequence
step.
|
|
METRAwin 90-2: Software for the following Products
|
|
|
|
|
