|
 |
|
METRAmax 6 ANALOG
OHMMETER |
|
|
METRAmax 6
Ohmmeter Resistance Measuring Instrument
with Analog Display
|
|
|
METRAmax 6 Ohmmeter
METRAmax 6 Ohmmeter Resistance measuring instrument with analog display for use in the
plant, on service calls and for installation work
|
|
Ohmmeter |
- Resistance measuring instrument with analog display for use in
the plant, on service
calls and for installation work
- Measuring method: current measurement
- Large variety of measuring ranges from
0.05 to 1 M Ohm (5
ranges)
- Ranges for rough capacitance measurement
from 0 to 30 000 uF
- Integrated buzzer for continuity testing
- Rugged moving-coil mechanism with spring
loaded bearing jewels
allows for use under
adverse operating conditions
- Dimensions: 100 x 140 x 35 mm, weight:
approx. 0.3 kg without
battery
- Battery: 1.5 V IEC LR 6 (AA mignon)
|
|
|
|
|
The METRAmax 6 is a
battery-powered ohmmeter. It excels by its handy size, ease of use,
and a large measuring span.
It is meant for measurement of
resistances between 0.05 Ohm and 1 MOhm, for rough capacitance
measurements between 1 uF and 30,000 uF, and for continuity tests
with beeper
|
The METRAmax 6 offers 9
measuring ranges for resistance and capacitance measurements.
The measuring ranges are selected with a range switch.
The meter has a rugged movement with spring-loaded jewels.
It is
widely insensitive to vibrations and shocks.
The scale is mirror-backed for exact reading of the measured
values.
The measuring range Ohm x 1, marked in red, and the scale marked in
red are provided for
measurements of small resistance values (0.05 Ohm to 50 Ohm).
To measure higher resistance values, there are 4 measuring ranges
which have a common black scale. A part of the two scale arcs is
boldly marked.
The measuring error, referred to the actual
resistance value, is smallest on these marked indicating ranges.
For
rough capacitance measurements, there are 4 measuring ranges with a
common scale.
A beeper is incorporated for audible continuity
tests.
The connectors are protected against accidental contact.
It is
recommended to use measuring leads with shockproof connection plugs
(4 mm diameter).
|
|
