Toll Free: 866-436-2430                     Email: sales@hotektech.com
  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

MAVO- SPOT 2 USB LUMINANCE METER

MAVO-SPOT 2 USB Luminance meter. The meter provides luminance measurements from the distance from 1 m to infinity, while taking into consideration the ambient light.
The MAVO-SPOT 2 USB Luminance meter is equipped with a high quality SLR optical system having a viewing field of 15° and clearly marked measuring angle of 1° in the center as well as an external focusing ring.
Two close-up lenses (optional) permit reducing the measuring distance down to 34 cm.
The light sensor is colour corrected, i.e. its spectral responsitivity is matched to the photopic daylight vision of the human eye V(λ). The accuracy classification for luminance meters is defined in DIN 5032-7, class B and in EN 13032-1, Appendix B.
The MAVO-SPOT 2 USB Luminance Candela meter fully meets all the regulations of the class B.
A data memory for storing up to 1000 single measuring values, which can be subdivided into 10 groups, is available in the MAVO-SPOT 2 USB. The memory data can be visualized and processed directly with the keyboard and the display or also in the PC via USB Port and the included standard software.
 

MAVO-SPOT 2 USB Luminance Meter
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com
  • High precision spot metering of the luminance with a measuring angle of 1° according to
    DIN 5032-7, Class B and DIN EN 13023-1, Appendix B
  • SLR viewfinder with measuring circle of 1° and viewing field of 15°
  • Measuring from the distance from 1 m to infinity, with close-up lenses (optional) down to 34 cm
  • Contact measurement with optional Measuring Probe
  • Backlight display illumination with LCD read-out in the viewfinder
  • The silicon photo diode is color corrected, i.e. its spectral responsitivity is matched to the
    photopic daylight vision of the human eye V(λ)
  • Remarkably easy, one hand use, with only four buttons and one sliding switch
  • Configuration via DIP Switches in the battery compartment
  • Automatic measuring range selection, total range 0.01 cd/m² to 99.990 cd/m² subdivided in four
    measuring ranges and 0.003 to 29.187 foot Lambert
  • Data memory for up to 1000 single measuring values, or alternatively in 10 groups
  • USB 2.0 Port
  • Tripod socket
  • CD Rom included with software for visualizing and processing the values measured and controlling the meter.
  • Aluminum transport case, USB cable incl. in the supply
Type Luminance meter, with precision single lens reflex optical system
 display in view-finder
Measuring angle 1°
Accuracy Class B according to DIN 5032-7 in all chapters and
DIN EN 13032-1, Appendix B
Optical System Stray light error ambient lights ( fs ( µ ) < 2% )
Field of view 15° diagonal
Focusing distance 1 m to ∞ - focusing with external ring at the lens
Light Sensor Silicon photo diode with V(λ) filter (f1 < 3% )
Luminance measuring unit cd/m² or fL ( selectable with DIP switches )
Measuring ranges Automatic measuring range selection
0.01 cd/m² to 99 990 cd/m² in four ranges or
0.003 fL to 29 187 fL in four ranges
Measuring functions Luminance in cd/m² or fL ( selectable )
Luminance percentage
Memory     MEM
Correction Factor  CORR
Measuring the illuminance ( Lux ) with Gossen Reflection Standard
(optional accessory )
Measuring mode Measurement from distance
(Close-up lenses for shorter distances, optional accessories )
Contact measurement
(Measuring Probe for contact measurement, optional accessory )
Data Memory Up to 1000 individual measurement values, or in 10 groups
(adjustable with DIP switches in the battery compartment
USB Port USB 2.0 (1.1 compatible)
Operating Elements Easy to use with 4 buttons, 1 sliding switch
Configuration with DIP switches in the battery compartment.
Operating Temperature 0°C to 50°C, According to EN 61010-1:2001, cl. 1.4.1
Storage Temperature -20°C to +70°C
Power Supply 2 x 1.5 V size AA, when connected to PC, power will be supplied
via the USB cable
Software gLux software and additional applications
Others Tripod socket
Weight appr. 400g without batteries
Standard Equipment Meter in aluminum transport case, gLux software incl.
meter driver, USB cable, lens cover, eye piece, batteries and
instruction manual
Optional accessories Close-up lens 1 (51 cm to 100 cm ),
Close-up lens 2 (34 cm to 50 cm )
Measuring Probe for contact measurement, Reflection Standard for
Lux measurement, Stray light screen, Carrying strap.

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]