Toll Free: 866-436-2430                     Email: sales@hotektech.com
  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

MODEL 23 DC VOLTAGE SOURCE BATTERY TESTER
  

MODEL 23 DC Source Tester simultaneously measures battery voltage UB and internal battery resistance Ri. 
The sophisticated electronics used in this tester yield measurements in less than 1 second. Measurements repeat within ±1 digit even when batteries are being charged. 
This is a prerequisite to detect long term deviations and capacitance deterioration on stationary batteries. 
DC23 Tester
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

We offer three ways to test stationary batteries. These tests yield information to decide, on site, whether a battery should be replaced or not. You can store and retrieve all data for your ISO 9000 Quality Assurance System. The lightweight and small tester is simple to operate with only three controls, no zeroing and no adjusting is needed. 
The 23 DC Source Tester is also available as a unique car battery tester. 
The two step test is done at no load and at a 30A load. Car electronics do not have to be disconnected. Deteriorated batteries are easily spotted and are graded GOOD, FAIR, FAIL. 
Test results can be printed.
DC Tester Models
 
Product Description
Full Version MODEL 23 DC-Source Tester with RS-232 and Carrying case,
windows software, label printer, battery pack for printer,
4-wire measuring clips and RS-232 cable to PC. Weight 3kg.
Med Version MODEL 23 DC-Source Tester with RS-232 and Carrying case,
windows software, 4-wire measuring clips, RS-232 cable to PC.
Gen Version MODEL 23 DC-Source Tester without RS-232 and Carrying
case and 4-wire measuring clips.
Car Full 23 DC-Source Tester for car battery testing with RS-232 and Carrying case, battery load, label printer and measuring clips.
Car 23 DC-Source Tester for car battery testing without RS-232 with carrying case, battery load and measuring clips.
Accessories
 
Accessory Description
ACS1 Special 4-wire measuring clips.
ACS2 USB - RS232 Adapter cable, USB 1.1 compatible, Windows 98/2000/ME/XP, > 1Mbps data transfer rate
Specification
 
Size of Batteries Test batteries 0.5Ah-2000Ah and voltages up to 120V sealed, non-sealed;
lead acid and other
Voltage Ub Ranges 2; 0-30V, 0-200V
Resolution; 10mV, 0.1V
Accuracy; 1% +/- 1 digit		 200Vdc maximum
Display; 3 digits
23° +/- 3°K
Source Resistance Ri Ranges 3; 0-20 milliohm, 0-400 milliohm, 0-8 Ohm
Resolution; 0.01, 0.1 milliohm
Measurement repetition; +/- 1 digit
Accuracy; 1% +/- 2 digit		 Ub: 1.6V-120V
Display 3 digits
Signal max 20dB below noise
Signal max 20dB below noise
Display 6.5mm, 16 character LCD V, milliohm, Mode
Interface RS-232, isolated from batteries 300V CAT II
Operation/Time Via menu, 3 controls 0.6s measurement time
Data Storage 500 complete sets UB, Ri N=1 to N=500
Supply 9V battery or accumulator for 6-8h operation
Size/Weight 155 x 90 x 35mm; 400 gr. -
Temperature Operating: 0-30°K; storage: -10 -40°K -
Tester versions Full: Tester, printer, software
Med: Tester, software
Gen: Tester, no interface
Car: Tester including battery load
Car Full: Tester including battery load,
printer		 Stationary batteries
Stationary batteries
Traction/Stationary batteries
Car batteries
Car batteries
APPLICATION SOFTWARE

Battery Programs

 APPLICATION SOFTWARE

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]