Toll Free: 866-436-2430                     Email: sales@hotektech.com
  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

THREE PHASE POWER TRANSMITTER ITL-300
  

ITL-300 3-phase Power Transmitter  measures power in 3-phase systems. 
Due to its wide frequency range DC-10kHz, it can also be used to measure power in thyristor controlled circuits and frequency inverter systems.
The 0-20mA output signal is galvanically isolated from the transmitter input circuitry. 
ITL-300 Transmitter
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

  • Measures power in 3-phase system

  • Broad band DC - 10kHz

  • Suitable for frequency inverters

  • 0.2% accuracy

  • Output 0-20mA galvanically isolated

  • Simple connection

  • OPTION: Current sensor module up to 100A;
    OPTION: Fast response output
Introduction

In the 50/60Hz three phase system current is measured via current transformers. 
In thyristor controlled circuits with high current harmonics and in variable frequency inverter systems current must be measured via Hall sensors.

ITL-300 current ranges 50mA / 100mA / 200mA are provided for current outputs from Hall sensor modules. A 3-phase current sensor module for current ranges 25A / 50A / 100A is available.

ITL-300 Versions

Value Ranges
Voltage Nominal 250V linear up to 400V
Current 1A, 5A for current transformers,
overload 50A, 0.4 sec.;
50mA, 100mA, 200mA for Hall sensor transformers
Power 250W and 1250W for current transformers;
12.5W, 25W and 50W for Hall sensor transformers

 

Options

Option Description
01 Three phase current sensor module,
0.5%, DC-10kHz, requires +12V/300mA supply
02 Fast response output, 40ms for
0-90% of final value

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]