Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  

GREYBODY BLACKBODY CALIBRATOR

Model 550-02 Blackbody IR Calibrator. Temperature range 30°C to 350°C
Model 975 Greybody IR Calibrator. Temperature range 50°C to 350°C
Economical IR Calibration Blackbody Greybody Source for Low-End Thermometers
Both blackbody and greybody offer cost effective solutions for the calibration and testing of infrared thermometers. 
QUICKCAL BLACKBODY - Hand-Held Infrared Calibrator
IR Calibration Blackbody Greybody Source

  • Low Cost

  • Very Portable

  • Fast Response Times

 

The Quick Cal Blackbody is ideal for rapid and portable checking of infra red thermometers. 
The Greybody Model 975 gives fast accurate results with a larger sensing area, and less emissivity.

A temperature sensor sits just under the target surface and controls the temperature of the source. 
A custom designed surface sensor is used to set the controller calibration and a traceable certificate is supplied with each source. Either model can be programmed in Fahrenheit or Celsius operation.
Blackbody Model 550-02
Temperature Range 30°C to 350°C
Display Resolution 0.1°C
Time to Temperature 9 minutes
Target Size 25 x 115mm Cavity with end cone
Stability ±0.5°C
Accuracy ±1°C
Emissivity

>0.99 Surface coating 0.98 - cavity
gives overall emissivity of >0.99
Power

110 VAC ±10%
300W
Dimensions 65mm x 152mm x 175mm (HxWxD)
Weight 3.3 lbs (1.5kg)
Greybody Model 975
Temperature Range 50°C to 350°C
Display Resolution 0.1°C
Time to Temperature 35 minutes
Target Size 70mm Diameter
Stability ±0.5°C
Accuracy ±2°C
Emissivity >0.95
Power

180 Watts
110 VAC ±10%
Dimensions

115mm x 230mm x 225mm
(HxWxD)
Weight 8.6 lbs (3.9kg)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]