Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  

RADIATION BLACKBODY PYROMETER CALIBRATOR


Gemini R 976 Blackbody Calibrator radiation source.
Calibration of Radiation Pyrometers: 50ºC to 550ºC
The Gemini R is a blackbody calibrator source with which radiation pyrometers, commonly referred to as IR sensors, can be calibrated. With a temperature range of 50ºC to 550ºC, the temperature of the cavity can be set with 0.1ºC resolution. 
The temperature of the furnace is set and indicated on a PID controller. 
An independent indicator is also provided for higher accuracy with a standard probe, which indicates the actual radiance temperature. 
Temperature variation over a 5-minute period, as viewed on the temperature controller, is ±0.2ºC and a radiation thermometer directed into the cavity detects similar variations.

GEMINI R - Medium Temperature Blackbody Calibrator
Blackbody Calibrator
  • Medium-Temperature Blackbody Source

  • 65mm Cavity Diameter

  • 0.995 Emissivity

  • Portable

  • Accepts Fixed-Point Cells

The Gemini R’s cavity’s size is 2.5” Ø x 6.3” deep (65mm x 160mm). 
Maximum temperature differences are ±1ºC in the range of 100ºC to 500ºC. 
The Gemini R is capable of accepting blackbody fixed points to achieve the highest level of a radiation measurement possible. 
Typical fixed-point uncertainties are ±0.25ºC. Gallium, indium, tin and zinc cells are available.

Emissivity is greater than 0.995, and traceability may be established with a NIST certificate
for the built-in indicator and/or supplied probe. 
The Gemini R can be supplied with RS232 or RS422 communications.

Model 976
Temperature Range 30°C to 550°C
Accuracy ±2°C
Emissivity Greater than 0.995
Stability ±0.2°C
Display Resolution

0.01°C to 99.99; 0.1°C
from 100.0 to 550.0

Cavity Size

65mm diameter, 160mm deep 

Time to Temperature 45 minutes
Power

1000 Watts typical 110 VAC ±10%

Dimensions 310mm x 265mm x 200mm (HxWxD)
Weight 22 lbs. (10kg)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]