Toll Free: 866-436-2430                     Email: sales@hotektech.com
 
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

PORTABLE LIQUID BATH DRY BLOCK CALIBRATOR


Hyperion 936 Liquid Bath. Temperature range 45 below ambient to +140°C (absolute minimum -45°C)
Drago 934 Liquid Bath. Temperature range
+30°C to +250°C in an ambient of 25°C or below
Portable Liquid Bath with Dry-Block Conversion Option
Portable stirred liquid baths to calibrate temperature sensors to 250°C.
The:
Hyperion Portable Liquid Bath calibrates from 45°C below ambient to 140°C (284°F) and the
Drago Portable Liquid Bath from ambient to 250°C (482°F). 
The useable calibration volume is a massive 2.5” (65mm) diameter and the overall depth of 7.5” (190mm) gives more than twice the volume of competitors’ products.

Stirred liquid baths are suitable for temperature sensors of all types, shapes and sizes. 
Stabilities are much greater than those from Dry Blocks alone and with suitable reference thermometers performance of up to 0.005°C is achievable.

ISOCAL 6 Calibrators (Large Volume)
Portable Liquid Bath
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

The Hyperion and the Drago are available in two models. If the liquid is directly in the block then the controller only model, or Basic (B) model, can be selected. However, instead of putting liquids directly in the block liquid containers can be used to facilitate rapid change of liquids. 
When using a liquid container, Dry Block Insert, Blackbody Target or the Surface Sensor Kit a separate reference thermometer should be used to compensate for the varying offset between the controller and the accessory temperature. In this case you should choose the site version (S) which includes a built-in temperature indicator for high accuracy or for best accuracy an external indicator can be used. 
An ideal combination is the TTI-6 and 935-14-16 Probe which can be programmed with up to five calibration points to provide high accuracy digital probe matching.

Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature. Increased resolution of ±0.01 available throughout the range via the PC interface and, locally on the auto-ranging front display, from -19.99 to +99.99 with the Hyperion and 0.01 to +99.99 with the Drago.
The controller features multi-point block to display correction giving good absolute accuracy.

Temperature Range Hyperion:

45 below ambient to +140°C
(absolute minimum -45°C)

Drago:

+30°C to +250°C in an ambient
of 25°C or below

Liquid Bath Accuracy ≤0.2°C Throughout entire temperature range
Calibration Volume 65mm diameter by l60mm deep

Absolute stability
over 30 minutes

 

Stirred Liquid Bath:             
Dry Block Bath:                  
Ice / Water Bath: 
Blackbody Source: 
Surface Sensor Calibrator: 
ITS-90 Fixed Point Apparatus: 

 ±0.025°C
±0.03°C
±0.001°C
±0.3°C
±0.5°C
±0.0005°C
Computer Interface Included with Windows Software

Thermal
Performance

As a liquid comparison bath
Uniformity down to ±0.005°C over the full range

Display Resolution

0.01
0.1

-19.99 to 99.99
-55.0 to -20.0 and 100.0 to 140.0
PC can display 0.01 across whole
range with the software included

Indicator Units °C, °F, K
Power

110VAC ±10% (50/60 Hz)
Hyperion: 200 Watts
Drago: 1000 Watts

Overall Dimensions 302mm x 176mm x 262mm (HxWxD)
Weight

Hyperion: 26.5 lbs (12kg)
Drago: 17.6 lbs (8kg)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.