All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

 

MultimetersOhmmetersPressureStandardsTemperatureTransmitters

FURNACE FOR ALUMINUM SILVER FIXED POINT CELLS
Model 426 Oberon Furnace Heat pipe is for Aluminum, Silver Slim Fixed Point Cells

Oberon 426 High Temperature Furnace. High Temperature Calibrator.
Temperature range
450°C to 1000°C
For Aluminum, Silver slim fixed point cells and comparison calibration.
Model 426 Furnace is for Aluminum, Silver slim fixed point cells as well as for comparison calibration. 

OBERON 426 - High Temperature Furnace

Temperature Furnace Calibrator
  • Connections are provided for a water 
    supply of 0.5 to 1 litre per minute. 

  • Water supply and waste connections are 
    provided. 

  • Use without cooling is not recommended 
    above 700ºC.

  • The Oberon can be used with Blackbody 
    Fixed Point Cells.

Heat pipes provide the ideal conditions for the creation and maintenance of slim ITS-90 cells.
The furnace core is a specially-designed stress-free isothermal heat pipe, which provides a very
low thermal gradient along the core working length.

The heat pipe is designed so that the inner wall is not subject to thermal expansion stresses
from the outer wall before the heat pipe reaches conduction temperature. 
The working fluid is permanently and safely sealed within the plasma-arc welded enclosure.

Model 426
Temperature Range 450°C to 1000°C
Stability ±0.05°C
Display Resolution 0.1°C
Cavity Size

50mm diameter 300mm deep

Supply

110VAC ±10% (50/60Hz) 1000W

Dimensions 410mm x 415mm x 280mm (HxWxD)
Weight 67.2 lbs (30.5kg)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]