Oceanus-6 Temperature Dry Block Calibrator Range -25ºC to 110ºC
The Oceanus-6 Temperature Dry Block Calibrator has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 2 inch diameter by 11.8 inches deep (52mm Ø x 300mm). 
The Oceanus-6 can be used as a Dry Block, a Liquid Bath, a Blackbody Source for infrared thermometers, a Surface Sensor Calibrator and for performance to a few milliK (0.001ºC) ITS-90 Fixed Points. Like all Isotech calibrators Oceanus-6 is available in two models, the BASIC (B) version with one controller, and the SITE (S) version with onboard secondary display for high accuracy digital probe matching.

• Universal Input Temperature Indicator
  Included in S Model to allow for 
  programming of up to five “correction” points

• ITS-90 Fixed Points
  Can be used with the Gallium and 
  Triple Point of Water Fixed Point Cells

• Dry or Liquid Bath

• Windows Software and PC Interface

• High Capacity Deep Block for Very Long Thermometers

• Ideal for Laboratory Comparison and 
  Fixed-Point Calibrations

Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature.
Increased resolution of ±0.01 available throughout the range via the PC interface and 
from  -19.99 to +99.99 locally on the auto-ranging front display. 
The controller features multi-point block to display correction providing excellent absolute accuracy.
The SITE model has a universal sensor input allowing Platinum Resistance Thermometers, Thermocouples (Types K, N, R, S, L, B, PL2, T, J and E) along with Linear Process Inputs
including 4-20mA current transmitters to be displayed on the indicator. 
The indicator can be programmed with up to five calibration points to provide high accuracy digital
probe matching. 
The indicator and controller are both addressable over the communications link.