Toll Free: 866-436-2430                     Email: sales@hotektech.com
  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

COMPACT TEMPERATURE CALIBRATOR

Quick Cal 560 Low Temperature Dry Block Calibrator.
Quick Cal 550 High Temperature Dry Block Calibrator. 
Fast, compact, hand-held temperature calibrators.
The Quick Cal Temperature Calibrators are hand-held, high or low temperature calibrators that are ideal for less-exacting applications. Both versions include interchangeable inserts for additional convenience.
Quick Cal 560 Low Temperature version has a range of -15°C to 140°C (284°F). 
This highly portable calibrator can work from an external 12-volt rechargeable battery, 
or a mains supply of 100-240V, 50/60Hz. Each calibration well is 13mm in diameter and 120mm deep, and two inserts—one blank and one drilled 6.8mm in diameter and 120mm deep—are included. Customized pre-drilled inserts are also available.
Quick Cal 550 High Temperature has a range of 30°C to 350°C (692°F). 
This calibrator has a single, larger well and interchangeable pre-drilled inserts which are 25mm in diameter and 120mm deep. Blank and other special drillings are available.
QUICKCAL - Hand-Held Dry Block Temperature Calibrator

Hand-held temperature calibrators.
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

Both units will be supplied with 100-130 VAC, 50/60Hz power supply unless specified otherwise.

Accessories include a handbook which details efficient and useful ways to use the Quick Cal, a carrying case, and alternative inserts. These calibrators are ideal for verification of sensor performance or quick calibrations for less critical sensors.
Model QuickCal-560
Temperature Range -10°C to +140°C in an ambient of 20°C
Set Point Resolution 0.1°C over range
Accuracy

±0.2 to ±0.4°C using Comparison
Techniques
±0.4°C against display temperature with a single probe in the 4.5mm pocket
Stability ±0.1°C
Time to Set Point 9 minutes from 0°C to 100°C

Additional Time
for Best Stability

 Typically 5 minutes
Calibration Volume

Two 13mm diameter pockets 120mm deep
Supplied with two sleeves, one blank and one drilled 6.8mm diameter 120mm deep
Power

15V DC or 100-240V, Switch mode power supply (50 / 60 Hz)
Overall Dimensions 65mm x 152mm x 175mm (HxWxD)
Weight 3.3 lbs (1.5kg)

 

Model QuickCal-550
Temperature Range +30°C to +350°C in an ambient of 20°C
Set Point Resolution 0.1°C over range
Accuracy

±0.2 to ±0.4°C using Comparison
Techniques
<100°C ±0.4°C against display temperature with a single probe in the 4.5mm pocket
>100°C ±1.5°C against display temperature with a single probe in the 4.5mm pocket
Stability ±0.1°C
Time to Set Point 9 minutes from Ambient to 350°C

Additional Time
for Best Stability

 Typically 5 minutes
Calibration Volume

25mm diameter x 120mm deep
Supplied with insert, 5 pockets, 8mm,
6.5mm, 6.5mm, 4.5mm, 4.5mm, all
115mm deep
Power 110 VAC ±10% (50 / 60 Hz)
Overall Dimensions 65mm x 152mm x 175mm (HxWxD)
Weight 3.3 lbs (1.5kg)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]