-
The
display shows the true unfiltered single measurement value, not an
artificially filtered value which appears stable only due to
filtering and averaging of values.
-
There are
no preset type controls such as variable resistors in the design, it
is completely solid state. Calibration adjustments are software
controlled.
-
There are
no mechanical relays, so the TTI-2 has increased life and
reliability.
-
Simultaneous
display of two channels — essential for high quality comparison
calibration.
-
In
statistics mode, the TTI-2 resolves and averages up to 50 readings
of 2 channels simultaneously and present the mean values
(Temperature, Resistance or Ratio) to ±0.00001°C resolution as
well as giving the standard deviation of the mean value.
-
The TTI-2
uses a single power source which reduces noise effects considerably.
-
Password
protection — prevents unauthorized tampering with the Bridge.
-
The Bridge
automatically stops and awaits instruction once the standard
thermometer has been either over temperatured, or has passed its
recalibration date.
-
With an
uncertainty of better than 1mK (0.001°C), this temperature
indicator is the best of its kind.
-
Based on
its use, one German D.K.D. approved laboratory has obtained a
calibration schedule with a total uncertainty of 0.5mK at the triple
point of water.
-
The TTI-2
can be programmed with up to 10 thermometer characteristics.
-
If you
would like to know more about the TTI-2 we have a video, a
comprehensive handbook, and a P.T.B. evaluation.
