LCR DIGITAL HANDHELD LCR METER

LCR-500 LCR Portable Bridge Meter.
LCR 500 is an economical, powerful handheld LCR meter with features rivaling expensive benchtop systems

• 1mΩ
  1 mΩ to 10 MΩ
  0.1 pF to 10 mF
  0.1 μH to 10,000 H

• Auto ranging and manual ranging

• Two frequency operation: 120 Hz and 1 kHz

• Sorting capability with selectable tolerances

• True bridge complex impedance capacity, L/C/R values as well as simultaneous D/Q (Dissipation/Quality)

• Auto power off; uses standard 9 V battery

• Operating guide attached to unit

• Automatic statistics

CAPACITANCE (C)
Full scale ranges: 1,000 pF to 10 mF, in 8 ranges.
Resolution: 0.1 pF, 0.001 mF

Accuracy

Range	120 Hz	1 kHz
10 mF	±(5.0% + 5 LSD)	NA
1,000 µF	±(1.0% + 5 LSD)	±(5.0% + 5 LSD)
100 µF	±(0.7% + 3 LSD)	±(1.0% + 5 LSD)
1,000 nF,10 μF	±(0.7% + 3 LSD)	±(0.7% + 3 LSD)
100 nF	±(0.7% + 5 LSD)	±(0.7% + 3 LSD)
10 nF	±(1.0% + 5 LSD)	±(0.7% + 5 LSD)
1,000 pF	NA	±(1.0% + 5 LSD)

D (Dissipation): ±(0.7% + 100/C rdg +5 LSD), basic accuracy.

GENERAL SPECIFICATIONS

Displays:
L/C/R: Maximum display of 9999 except at 10 mF (120 Hz) and 1 mF
(1 kHz) measurement ranges which have a maximum display of
1999.
D/Q: 3 digits, maximum display 999 (autorange).
Status: Annunciators for units, low battery, frequency, open fuse;
audio tone for tolerance testing, and other test conditions.
Ranging mode: Auto and manual.
Test frequency: 1 kHz and 120 Hz.
Test signal level: 0.9 Vrms approximately.
Measurement rate: 1 measurement/second, nominal.
Measurement terminals: 2 banana jacks and 2 easy-insert component
sockets.
Operating modes: Relative, calibration, tolerance sorting, and max/
min/avg recording.
Input protection: 70 mA fast-blow 250 V fuse.
Auto power-off time: Approximately 5 minutes; may be disabled.
Power Requirements:
1) Battery, 9 V;
2) External adapter, 12-15 Vdc, 50 mA.
Dimensions: 19.2 cm L x 9.0 cm W x 3.7 cm H (7.56" x 3.54" x 1.46").
Weight: 390 g (3 oz).