|
RIPPLE NOISE METER
SCANNER
|
|
SC-82 Ripple Noise
Meter Scanner.
SC-82 is High Frequency
Signal Scanner for Ripple Noise Measurement with RM-103 Ripple Noise
Meters and Oscilloscopes. With RM-103, Ripple Noise Meter, SC-82
can be controlled to select input channel via RM-103. Also we have
DP-100 Differential Probe for more reliable Ripple Noise measurement.
These family covers wide band range up to 100MHz
|
Ripple Noise Meter Scanner |
| Our
Price: |
Contact us for
pricing |
| Phone:
|
253-927-6186
866-318-6186 |
| Fax:
|
253-927-6189 |
| email:
|
sales@hotektech.com |
|
|
|
|
|
-
DC-
100MHz -2.0dB
-
Up to
Sixteen (16) Channels
-
Can be
controlled by Digital Input or Relays
-
Best
combination with RM-103
Ripple Noise Meter
|
-
Frequency
Bandwidth DC- 100MHz -2.0dB
-
SC-82
Ripple Noise Meter Scanner
makes or brakes both Signal and GND at the same time on switching.
-
Up to
Sixteen (16) Channels Scanner is possible on cascade Connection.
-
Can be
controlled by Digital Input or Relays
-
Best
combination with RM-103, Ripple Noise Meter because SC-82
can controlled by GPIB via RM-103.
|
Ripple Noise Meter Scanner specification
| Signal Switcher Section |
|
| No. of Channels |
8 |
| Frequency Bandwidth |
DC- 100MHz (-2.0dB or less) |
| Common mode Noise Reduction |
more than 25dB (DC to 100MHz) |
| Cross talk |
more than 44dB (DC to 100MHz) |
| Cut Off Voltage |
DC250V MAX |
| Cut off Current |
0.5A MAX |
| Relay Contact Method |
Break Before Make |
| Withstand Volt. between Signal Lines |
DC250V |
| Withstand Volt. between Signal and Frame |
DC250V |
| Control Section |
|
| Input Voltage |
0.0-5.0V(TTL/CMOS Input) |
| Switching Time |
less than approx. 3ms |
| General |
|
| Input Power Voltage Range |
AC100V-AC240V 50-400Hz |
| Consumption Power |
approx.10VA |
| Dimensions |
225(W)x51(H)x180(D) |
| Weight |
approx.2.0kg |
|
