PROCESS SIGNAL VOLTAGE CALIBRATOR

PSC-4000 Process Signal Calibrator
The PSC-4000 Process Signal Calibrator is a portable, hand-held, full function voltage and current calibrator with the capability to both read and simulate common process control signals.
The PSC-4000 incorporates multiple input/output ranges for both current and voltage operating mode. When operated in the current mode, the calibrator can source, simulate, or read over a 0 to 24 mA range with .01 mA resolution. It can also supply 24 VDC to power a two wire transmitter while simultaneously reading back its output both in milliamps or % of full scale. When operated in the voltage 
range, the PSC-4000 can read or source over two ranges, 0 to 20.00 volts or 0 to 200.0 mV.

• Reads and Simulates Process Control Signals

• Memory for 3 Calibration Points in Each Range

• Multiple Input/Output Ranges for Current and Voltage Mode

• Built-in 24VDC Source for Powering Two-wire Transmitters

• Accuracy of .025% FS±1 LSD

• Large 32 Character Dot Matrix Display

Each Unit Includes:
Test leads, carrying case, 4 AA alkaline batteries,
NIST Certificate, and instruction manual