All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters

HIGH TEMPERATURE HUMIDITY  SENSOR

HICH-1x C-Sensor for high-temperature applications stainless steel housing 20mm -40.....+120°C
The complete probe housing is made of a special stainless steel.
A special, temperature resistant, 2m silicone cable for applications in higher temperature ranges is included with the sensor.
Therefore the complete sensor can be mounted inside the high temperature area up to +120°C.
Thanks to the extremely precise temperature- and humidity sensing elements, high accurate measurement results and calculations e.g. for dew point, enthalpy etc. are possible.
The maximum distance between the probe and the included installation box amounts to 2m,
whereas from the installation box to the transmitter the maximum distance amounts to 30m.

The sensor is supplied as standard with
a sintered, stainless steel protection filter.


The new DCC-1 measurement element
can be plugged and is easy to replace if
necessary!
Technical specifications
Humidity measurement 0 ... 100% RH..... relative humidity
Accuracy ± 1.5% RH........ ( at 25°C)
± 2.0% RH.......... (at 0 ... 50°C)
±3.5% RH............(without calibration)
Reproducibility < 1.0% RH........( 6....97%)
 
Temperature measurement -20 ... 80°C ....... sensor system
Accuracy ± 0.3 K .............. (at 0 ... 50 °C)
< 0.1 K ..............typical Reproducibility
Output signal digital / analogues temperature- and humidity signal at 6 wire shielded standard cable.
Operation temperature DCC-1 cell sys. : -40 ... 120 °C
HICH-1x system : -40...120°C

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]