All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters

HICS HUMIDITY TEMPERATURE SENSOR

HICS-1x or -2x C-Sensor stainless steel housing 20mm
Robust stainless steel sensor for air humidity and temperature measurement in industrial environments,
which can be connected to the HygroDat 100-EC transmitters.
The probe housing is made of a special stainless steel as it is used in the pharmaceutical industry.
Thanks to the extremely precise temperature
and humidity sensing elements, high accurate measurement results and calculations e.g. for dew point,
enthalpy etc. are possible. The probe can be installed up to 30m from the transmitter.
The cable can be prolonged and shortened individually.

Various exchangeable protections
filters, depending on the application,
are available.
They assure an optimal
protection of the sensing elements.


The light and still robust polycarbonate housing can be used in the industrial environment without any problem.
Technical specifications
Humidity measurement 0 ... 100% RH..... relative humidity
 
Accuracy ± 1.5% RH........ ( at 25°C)
± 2.0% RH.......... (at 0 ... 50°C)
±3.5% RH............(without calibration)
Reproducibility < 1.0% RH........( 6....97%)
Temperature measurement -20 ... 80°C ....... complear sensor
Accuracy ± 0.3 K .............. (at 0 ... 50 °C)
< 0.1 K ..............typical Reproducibility
Output signal digital / analogues temperature- and humidity signal at 6 wire shielded standard cable.
Operation temperature DCC-1 cell sys. : -40 ... 120 °C
HIC-1x system : -20....+80°C

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]