All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters

HS TEMPERATURE HUMIDITY SENSOR

HS Temperature Humidity Sensor for Hygrodat 05-20
It can be mounted up to 60m from the transmitter using a shielded cable.
As plug a mini "Binder" connector with a maximum diameter of 13mm is being used.
For the first time that way a direct installation in installation tubes has been made possible.
The compact and robust polycarbonate armature of the sensor, contributes, thanks to its characteristics, to a quick response time of the sensor.
In a set, one wall mounting kit as well
as a duct mounting flange, which can be
employed for a sensor fixation on thin
wall ducts, are delivered.

If the ordered cable length is not sufficient, it can be extended by a extension cable without any problems.

The electrolytic CC-1cell can be easily plugged and
exchanged if necessary. Even without any special calibration this systems allows a basic
accuracy of +/- 2% rH!
Technical specifications
Humidity measurement 6... 100% RH air humidity
Accuracy Basic Accuracy : ± 2.0% rF
Temperature measurement -20 ... +80°C
Accuracy ± 0.3°C (at 0 ... 60 °C)
Operating temperature Sensor-Armature: -20 ... +80 °C

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]