Toll Free: 866-436-2430                     Email: sales@hotektech.com
  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

HUMIDITY TEMPERATURE TRANSMITTER

HygroDat 100-EC Alu Humidity Temperature Transmitter with aluminum housing
The versatile HygroDat 100-EC Alu Humidity Temperature detects by a remote sensor the actual relative air humidity and temperature value and converts them into an analogue or digital signal.
The very performing micro processor enables as well the calculation and output of other climate parameters such as dew point, enthalpy, mixing ration etc..
The whole system has been built with an open system architecture what makes it very
flexible.
The sensors can be installed up to 30m respectively 100m, depending on the version, from the
transmitter. For testing and adjustment purposes, the humidity standards, based on saturated salt solutions can be used.
The HygroDat 100-EC Alu transmits 10...15 times per second the measured values directly to the analogue outputs, what makes the system very quick and accurate. The transmitter disposes as well of a  automatic calibration function, that allows an easy and quick on site calibration and check by using the well proved Novasina SC humidity standards
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

  • Highest accuracy

  • Highest repeatability

  • Easy installation, starting up
    and service

  • Menu driven service tools

  • 5 different remote probes for
    various applications

  • 2 configurable analogue output signals

  • 2 line LC-Display

  • SI units US / ISO

  • Climate parameter calculation
    functions: dew point, enthalpy, mixing ratio

  • 5 point humidity calibration

  • Fieldbus CAN or RS-232 data interface

  • Calibration alarm for quality insurance

 
Technical specifications
Physical  principle Electrolytical humidity measurement Capacitive humidity measurement
Measurement range :
Humidity 6%...100% RH (w. saturation protect.) 0....100% RH
Temperature -20 ... +80°C / -4.....176°F -40 ... +120°C / -40.....248 °F
Dew point -40 ... +60°C / -40.....140°F -40 ... +60°C / -40.....140°F
Enthalpy 0.. 166KJ/kg / +8..... 79 btu/lb 0.. 166KJ/kg / +8..... 79 btu/lb
Mixing ratio 0 ... 49 g/kg / 0.....343 grn/lb 0 ... 49 g/kg / 0.....343 grn/lb
Basic accuracy
temperature +/- 0.2K ( 0.....50°C ) +/- 0.2K ( 0.....50°C )
humidity +/- 0.5% RH (at 25°C & 5 p.cal.SAL-SC) +/- 1.5% RH (at 25°C & 5 p.cal.SAL-SC)
resolution ( RH / T ) 0.1% RH / 0.1K 0.1% RH / 0.1K
repeatability ( RH / T ) < 0.3% RH / <0.1K < 1.0% RH / <0.1K
Operating temp.
Transmitter -0 ... 50° C / 14 ....140°F -0 ... 50° C / 14 ....140°F
Sensor probe -20 ... 80° C / -4 .... 176°F -40 ... 120° C / -40 ... 248°F
Power supply 16 ... 30V AC / 15... 40V DC or 90 ... 260V AC ( 50/60Hz )
Power consumption 3.5 VA AC / 3.0 W DC or 3.5 VA AC
Electromagnetic compatibility EN 50081-2 / EN61000-3-2/-3 / EN 50082-1/-2
IP-protect. / shock / safety regul. / vibration IP 65 / IEC 68-2-6 / IEC 61010-1 / IEC 68-2-6
Analogue output signals Voltage : 0 ... 10 VDC / 2 .... 10 VDC (at load >= 10k Ohm)
Current : 0 ... 20 mA / 4 .... 20 mA (at load <= 500 Ohm)
Digital interface Fieldbus : CAN 20 k .... 500 kBaud / Protocol : based CANopen
Serial : RS-232 ASCII Protocolstring (PC-Tool “Novalog 32”)
Storage temperature
Transmitter -10 ... 60° C / 32 ....122°F ( not condensing )
Sensor probe -10 ... 60° C / 32 ....122°F ( not condensing )

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]