|
PRESSURE TRANSFER STANDARD CALIBRATOR
|
|
PC6 Pressure Transfer Standard
The PC6 Pressure Transfer Standard combines the latest
developments in pressure instrumentation
with advanced precision Quartz resonator sensor and component technology
to offer a versatile
calibration instrument.
It is designed for accurately testing and calibrating the following types
of instruments:
Pressure Transducers / Transmitters, Pressure Switches / Relief
Valves,
Pressure Indicators (analogue / digital ), Process Indicators, Current /
Voltage to Pressure Converters
|
Pressure Transfer Standard
|
The compact size
of the PC6 PTS does not
compromise functionality.
It can simultaneously show pressure versus voltage,
current, date & time, percentage of pressure, pressure switch status,
maximum or minimum pressure values.
Data can be logged and stored with time and date
stamping for future reference.
PC6 PTS can source current and voltage using various options e.g. continuous,
step or square root functions.
The modular design of the PC6 PTS allows
for a customized calibrator to be created,
giving minimal functions if a noncomplex instrument is required (i.e. A simple
pressure indicator).
Alternatively, fully featured calibration systems
can be supplied, accommodating various
pressure ranges using external pressure modules
(EPM) or Digital Pressure modules (DPM). |
|
|
|
|
PRO PTS can be The
PC6 supplied with our hand held test systems:
LTP1 Low Pressure pneumatic test system -1 to 3 bar (-30 inHg to 45 psi),
TP1 Pneumatic pressure test system -1 to 40 bar (-30 inHg to 600
psi),
HTP1 Hydraulic pressure test system to 1000 bar (15,000 psi).
|
|
Pressure Transfer Standard Features
Small
and portable
Pressure measurement range:
1 to 2760bar A / 15 to 40,000psi A
Dual range option available
Voltage and current measurement and sourcing
Pressure to Current or Voltage conversion
Current or Voltage to Pressure conversion
Two wire Transmitter Simulation
Simultaneous display of pressure and selected
function
Timed / Event data storage with date & time stamping
Up and download Cal procedures via RS232 Interface
Alternative languages available: French, German,
Italian, Spanish.
Pressure switch test
Leak rate measurement 1 second to 999 days
Maximum and Minimum pressure values
Tare facility for pseudo gauge pressure measurement
|
Display hold facility
Supply output for transducer / transmitter
Pressure module temperature measurement
Resolution variation facility
External pressure module (EPM or DPM) interchangeability for required
pressure ranges
Windows based software SiCalPro for remote control
operation and data transfer into many applications. (Optional)
CE marked
|
|
 |
 |
|
 |
|
Differential
units are available as EPM (Contact for details and data sheet on EPM)
Overload Pressure 10% FS
Resolution 6 Digits
Pressure units bar, mbar, MPa, kPa, psi, kg/cmē, atm, inH2O, mH2O, mmH2O, inHg, mmHg, unit1, unit2 (user defined)
Overload Warning Flashing display and audible tone at 110% of FS
Temperature Display Temperature of pressure sensor module
(Accuracy: ą 0.5°C)
Pressure Switch Test Status OPEN / CLOSED
Operating Temperature 0 to 50°C
Calibrated Temperature 20°C ą 2°C
Calibrated Temp. Range 0 to 50°C
Storage Temperature -20 to 70°C
Temperature Effects 0.001% of reading /°C between 0 to 50°C
RS232 Parameters Baud rate 1200, 2400, 4800, 9600, stop bits 1 or
2, status ON or OFF
Zero Reset Manual - keyboard operation
Data Capacity 437 records into a maximum of 20 files, 32k memory
(additional 585 records, 32k memory option available)
Display Backlit LCD, 16 characters x 2 line alpha numeric
Pressure Media Water, Oil, Non-corrosive gases ( for other media
Contact
Us )
Humidity 5 to 95% relative humidity non condensing
Resolution Select Increase or decrease by a factor of 10
Power Supply 6V NiMH rechargeable battery / mains operation via
charger (supplied)
Battery Life Up to 10 Hours fully charged
Low Battery Continuous check, audio and visual warning
|
|
