Model 50101-G-02 0 to 25 kV & 50101-G-05 0 to 35 kV Voltage Sensor and Phasing Tester

Voltage Sensor Phasing Tester.
These Voltage Sensor Phasing Portable Testers Meters each have a single range of 0-25kV for Model 50101-G-02 and 0-35kV for Model 50101-G-05.
Both Voltage Sensor Phasing Testers are versatile, lightweight and easy to use. 
The Models 50101-G-02 & 50101-G-05 Voltage Sensor Phasing Tester come complete in a foam-lined carrying case with a 3kV proof test device used to test the instrument for correct operation before and after each use – a vital safety procedure.

These meters can be used for voltage detection and phasing at capacitance test points, or for voltage 
detection and phasing on bare energized
conductors (overhead or underground). 
The probes can be separated to be used
as a voltage sensor or capacitance sensor,
making it two units in one. 
This saves you both time and money. 
A five position selector switch mounted on the 
back of the meter housing is used to select voltage sensing on capacitance tap or on direct line and 
phasing on capacitance tap or direct 
line or a battery test position.

The construction of Models 50101-G-02 & 50101-G-05 Voltage Sensor Phasing Tester provide no exposed conducting terminals or meter circuitry.
The locking cable connector provides positive
contact and is totally enclosed electrically. 
The scale is large enough to be easily read 8 - 10 feet away when mounted on a suitable hot stick. 
Each model comes with an 8-foot phasing cable,
8-foot extension cable, a proof tester and a sturdy
carrying case as standard equipment.

*The Models 25 and 35 replace three separate
units made by our competitors because by
purchasing this one unit, you can not only do line
phasing and capacitance phasing, you can also
go line to ground, get accurate voltage readings
within 3%, and use the meter probe by itself for
voltage and capacitance sensing.