Model 50101-G-07 Phasing and Voltage Meters 9kV-36kV Phasing Voltmeter

Phasing Voltmeter Voltage Phase Sensor.
The Phasing Voltmeter provides a safe and convenient testing means for paralleling 3-phase high voltage circuits. 
The Phasing Voltmeter consists of two resistance elements connected in series with an indicating meter in the series connection Each resistance element is equipped with a test probe and a male threaded 5/8”-11 stud for use with quick change hot sticks.

The Phasing Voltmeter Phasing Voltmeter indicating voltmeter has two ranges, 
9kV and 36kV, with a range selector switch 
mounted on the back of the meter housing. 

The switch is clearly marked for the range of the 
voltmeter. This unit is lightweight and easy to read. 
Typical uses include line-to-ground voltage 
measurements and phase for paralleling operations.

The construction of the Model 50101-5-07 Phasing Voltmeter Voltage Phase Sensor provides no exposed conducting terminals or meter circuitry. 
The locking cable connector provides positive 
electrical contact and is totally enclosed electrically.

Attention is called to the scale markings in the 
voltmeter. 
There are a minimum of divisions, and the figures are 
large enough to be easily read 8 - 10 feet away when mounted on a suitable hot stick. 
The Phasing Voltmeter comes with 10 feet of cable, 
a 3kV proof tester, and a sturdy padded carrying 
case as standard equipment. 

Other lead lengths are available upon request.

Ranges 0-9kV/0-36kV, switch selectable
Input impedance: 72 megohms (approx.)
Maximum operating temperature range -20°F to +165°F (-30°C to +75°C)