Toll Free: 866-436-2430                     Email: sales@hotektech.com

 
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

0313 RF PLASMA AMPLIFIER GENERATOR


0313 Plasma Amplifier Generator.
0313 RF Plasma Amplifier Generator is 300 Watts RF Power at 13.56 MHz for Industrial and Laboratory Applications.
Optional RS232 communication: Full Control Of Generator/Amplifier Functions
.
AGC Power Leveling: Output Power Control to better than ± 2 W of set value.

 
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class B
Frequency of Operation / Frequency Stability
13.56 MHz default / 0.005%
RF Power Output 300 Watts into 50 Ohm
Gain (as amplifier) in MGC/Burst Mode 0 dBm IN, 2V CTL IN pin 5 200W ±3W
RF Input Drive (as amplifier) Typical range -20 dBm to 0dBm, 1V CTL IN pin 5
RF Input Drive for AGC Recommended +0 to +3 dBm for the best operation
Input Drive Source
(amplifier)
Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
Input and Output Impedance
50 Ohm
Input VSWR 1.2:1 max
Output VSWR 3:1 max
Output VSWR Protection 70W max reflected power limit. Automatic, limits typically within 0.5 ms after reverse power reaches 70W or power amplifier current preset limit.
Harmonic level @ 250W
 
Better than - 40 dBc for 2-nd harmonic, any other > -45 dBc
Spurious Output - 76 dBm equivalent noise level generated by internal circuits
Output Blanking For pulsed applications our amplifiers and generators offer blanking of the output signal for minimum noise RF spectrum
Dynamic Power Range 0 to 300W, settings within +/- 2W
Pulse Specifications Pulse Width from 2 ľs to continuous, user defined
Power Margin 20%
RF Input / Output Connectors INPUT BNC Female
OUTPUT N Female
BLANKING BNC Female
Rear Panel
AC Power Source 100 - 240 VAC, +/-10%, 47 - 63 Hz,
broad input voltage with no adjustment required.
AC Power connection IEC Standard Power Entry followed by RFI filter. Filter range 0.1 to 30 MHz min.
Cooling Forced air, temperature controlled heatsink temperature monitored for equipment safety at 70C limit.
Case Designed to meet EMI and RFI shielding requirements still chassis, blackened.
Dimensions (with hardware) H135mm x W211mm x L445mm ( 5.25” H x 8.3” x 17.5)
Weight 10.5 kg, 23.5 lbs.
Mounting Half Rack, 3U high. Optional: Rack Mount Kit, Adapter Kit, Coupling Screws.
Operating Temperature Temperature: 10° to 35° C ambient air

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]