All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters
0613 RF PLASMA AMPLIFIER GENERATOR
RF Plasma Amplifier Generator

0613 Plasma Amplifier Generator.
0613 RF Plasma Amplifier Generator is 600 Watts RF Power at 13.56 MHz for Industrial and Laboratory Applications.
Optional RS232 communication: Full Control Of Generator/Amplifier Functions.
AGC Power Leveling: Output Power Control to better than ± 5 W of set value.
 
  • 13.56 MHz up to 600 Watts
  • Low harmonic level at 550W h2 ≤ -40 dBc, 
    h3 and higher < -50 dBc
  • Accurate RF Power Meter, measures forward, reflected power simultaneously
  • Rear Panel Control of Generator and 
    Amplifier functions via 25 Sub D Analog communication port
  • Data acquisition: Status Monitoring & Power Measurement at Analog Port
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class B
Frequency of Operation / Frequency Stability
13.56 MHz default / 0.005%
RF Power Output 600 Watts into 50 Ohm
Gain (as amplifier) in MGC/Burst Mode 0 dBm IN, 4V CTL IN pin 5 400W ±3W
RF Input Drive (as amplifier) Typical range -20 dBm to 0dBm, 4V CTL IN pin 5
RF Input Drive for AGC Recommended +0 to +3 dBm for the best operation
Input Drive Source
(amplifier)		 Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
Input and Output Impedance
50 Ohm
Input VSWR 1.2:1 max
Output VSWR 3:1 max
Output VSWR Protection 80W max reflected power limit. Automatic, limits typically within 0.5 ms after reverse power reaches 80W or power amplifier current preset limit.
Harmonic level @ 550W
 		 Better than - 40 dBc for 2-nd harmonic, any other > -45 dBc
Spurious Output - 76 dBm equivalent noise level generated by internal circuits
Output Blanking For pulsed applications our amplifiers and generators offer blanking of the output signal for minimum noise RF spectrum
Dynamic Power Range 0 to 600W, settings within +/- 5W
RF Output Settings SubD 25 Analog and Digital I/O.
Port Power scale 1V=100W. Rear Panel
Pulse Specifications Pulse Width from 2 ľs to continuous, user defined
Power Margin 20%
RF Power Control Front Panel or REmote Power Control via Hardware Port SubD-25 or RS232 SubD-9
External Communication SubD 25 Analog and Digital I/O.
Port Power scale 1V=100W. Rear Panel
RF Input / Output Connectors INPUT BNC Female
OUTPUT N Female
BLANKING BNC Female
Rear Panel
AC Power Source 200 - 240 VAC, +/-10%, 47 - 63 Hz,
broad input voltage with no adjustment required.
AC Power connection IEC Standard Power Entry followed by RFI filter. Filter range 0.1 to 30 MHz min.
Cooling Forced air, temperature controlled heatsink temperature monitored for equipment safety at 70C limit.
Case Designed to meet EMI and RFI shielding requirements still chassis, blackened.
Dimensions (with hardware) H135mm x W211mm x L356mm ( 5.25” H x 8.3” x 14")
Weight 75 kg, 15.4 lbs.
Mounting Half Rack, 3U high. Optional: Rack Mount Kit, Adapter Kit, Coupling Screws.
Operating Temperature Temperature: 10° to 35° C ambient air

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]