All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters
1213 RF PLASMA AMPLIFIER GENERATOR
RF Plasma Amplifier Generator

1213 Plasma Amplifier Generator.
1213 RF Plasma Amplifier Generator is 1200 Watts RF Power at 13.56 MHz for Industrial and Laboratory Applications.
Optional RS232, RS485 or USB2 communication: Full Control Of Generator/Amplifier Functions.
AGC Power Leveling: Output Power Control to better than +/-10W of set value.

 
  • 13.56 MHz up to 1200 Watts
  • Low harmonic level at 1000W h2 ≤ -40 dBc, 
    h3 and higher < -55 dBc
  • Accurate RF Power Meter, measures forward, reflected power simultaneously
  • Rear Panel Control of Generator and 
    Amplifier functions via 25 Sub D Analog communication port
  • Data acquisition: Status Monitoring & Power Measurement at Analog Port
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class C
Frequency of Operation / Frequency Stability
13.56 MHz default / 0.005%
RF Power Output 1200 Watts into 50 Ohm
Gain (as amplifier) in MGC/Burst Mode 0 dBm IN, 10V CTL IN pin 5 1000W ±10W
RF Input Drive (as amplifier) Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
RF Input Drive for AGC Recommended +0 to +1.5 dBm for the best operation
Input Drive Source
(amplifier)		 Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
Input and Output Impedance
50 Ohm
Input VSWR 1.2:1 max
Output VSWR 3:1 max
Output VSWR Protection 240 W max reflected power limit. Automatic foldback limit with [W] level of protection depending on actual VSWR of a load connected.
Harmonic level @ 550W
 		 Better than - 45 dBc for 2-nd harmonic, any other > -55 dBc
Spurious Output - 55 dBm equivalent noise level generated by internal circuits
Output Blanking For pulsed applications, our amplifiers and generators offer blanking of the output signal for minimum noise RF spectrum
Dynamic Power Range 10 to 1200W, settings within +/- 10W
RF Output Settings SubD 25 Analog and Digital I/O.
Port Power scale 1V=100W. Rear Panel
Pulse Specifications Pulse Width from 2 mu to continues, user defined
Power Margin 30%
RF Power Control Front Panel or REmote Power Control via Hardware Port SubD-25 or RS232 SubD-9
External Communication SubD 25 Analog and Digital I/O.
Port Power scale 1V=1000W. Rear Panel
RF Input / Output Connectors INPUT BNC Female
OUTPUT N Female
BLANKING BNC Female
Rear Panel
AC Power Source 200 - 240 VAC, +/-10%, 47 - 63 Hz,
broad input voltage with no adjustment required.
AC Power connection IEC Standard Power Entry followed by RFI filter. Filter range 0.1 to 30 MHz min.
Cooling Forced air, temperature controlled heatsink temperature monitored for equipment safety at 70C limit.
Dimensions (with hardware) H135mm x W214mm x L445mm ( 5.25” H x 16.6” x 17.5)
Weight 14 kg, 31 lbs.
Mounting Half Rack, 3U high. Optional: Rack Mount Kit, Adapter Kit, Coupling Screws.
Operating Temperature Temperature: 10° to 35° C ambient air

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]