|
DESCRIPTION |
RANGE/CHARACTERISTIC |
|
Class of Operation |
Class B to 1000 Watts |
|
Frequency of Operation |
20 kHz to 6 MHz |
|
RF Power Output |
600W from 0.02 kHz to 6 MHz of
continuous output into any load.
Up to 1000W max from 0.4 MHz to 5 MHz, 50 Ohm load only, 20C
Pulsing and low duty cycle only! |
|
Gain |
62 dB @ 200W /0.5 MHz +/-1 dB 20 kHz to 60 MHz (200W Out) |
|
RF Power Input Drive |
Typical
range -20 dBm to 0 dBm, +5 dBm max |
|
RF Power Input Drive for AGC |
Recommended -3 dBm to 0 dBm for +/-0.3
dB gain flatness |
|
Input Drive Source |
Signal or function generator, analog
computer output capable of up to 1 Vp-p @ 50 Ohm (+5dBm) |
|
Internal RF Source |
DDS oscillator: 20 kHz to 6 MHz, 1 kHz
resolution |
-
Input and Output Impedance
|
50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR |
|
Output VSWR Protection |
160 W max. reflected power limit |
|
Harmonic level @ 750 W |
Better then
- 15 dBc for 3rd harmonic,
any other > -20 dBc |
|
Spurious Output |
- 26 dBm
equivalent noise level generated by internal circuits |
|
RF Output Settings & Control |
-Front Panel EDITOR and function
switches for manual control,
-RS232 port for GUI or other computer communication. Rear Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W. Rear
Panel. |
|
RF Power Meter accuracy |
+/-3% typical |
|
Output Blanking |
For pulsed applications, amplifiers
and generators may offer blanking of the output signal for minimum
RF spectrum noise.
Less than 1 mu Rise/Fall time. |
|
BURST |
Internal settings: Pulse
range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description for more
details. |
|
SWEEP Operation |
0.02 to 6 MHz. Min time 10 ms, max 10s.
Settings and activation from GUI only |
|
RF Connectors |
INPUT BNC Female
OUTPUT N Female
Rear Panel |
|
AC Power Source |
200-240 VAC, +/- 10%, 47-63 Hz |
|
AC Power Connection |
IEC
Standard Power Entry followed by RFI filter. Filter range 0.1 to 30
MHz min |
|
AC Circuit Protection |
Internally
fused on the main DC Power Supply, 15A |
|
AC Input Current (RMS) |
RF
Out nominal 600W: I<8A @ 220V
RF Out max 1000W: I<13A @ 220V |
|
Cooling |
Forced air,
temperature controlled, heatsink temperature monitored via RS232 GUI
interface. |
|
Acoustic level |
45 dBa @ Max
Fan Speed @ temp. |
|
Case |
Designed to
meet EMI and RFI shielding requirements AL chassis, yellow
conductive finish. |
|
Dimensions (with hardware) |
(H 178 x W
363 x L 388) mm (7” x 14.25” x 15.25” )
Optional Half Rack, 3U High. |
|
Weight |
25 kg, 54
lbs. |
|
Mounting |
Stand alone unit. (Optional Rack Mount
Kit) |
|
Environmental Conditions |
Temp: 10°C
to 35°C
Humidity: 80% |
