AG1013 RF PLASMA AMPLIFIER GENERATOR
RF Plasma Amplifier and Generator

Plasma Amplifier Generator.
AG 1013 RF RF Plasma Amplifier Generator has 1000 Watts RF Power at 13.56 MHz for Industrial and Laboratory Applications.
Generator Model AG 1013 is a robust source of RF power for laser modulation, plasma generation, general laboratory and general industrial applications.
Featuring leading edge solid state design for all generator stages and a built-in DDS signal source, 
it provides everything for a complete and reliable, controlled RF power delivery system.
It reflects the our ongoing commitment to provide RF power products of the highest
quality, incorporating the current requirements for complete remote control and data acquisition.
The Forced-air cooling system and the internal power supply are designed to permit
operation over a wide range of temperature and global AC line conditions.
The AG 1013 is built to withstand a +13 dBm (2.8Vp-p) Input signal. 
The unit amplifies the inputs of AM, narrow band FM and pulse modulations.
  • 13.3 MHz to 13.8 MHz up to greater than 
    1000 Watts
  • Low harmonic level at 1,000W h2£ -40 dBc, 
    h3 and higher < -55 dBc
  • Digital Meter, measures forward, reflected, 
    and load power simultaneously.
  • Front Panel Control of Generator and 
    Amplifier functions.
  • Data acquisition: Status Monitoring & Power Measurement at Analog Port
  • Optional RS232 communication: 
    Full Control Of Generator/Amplifier Functions
  • AGC Power Leveling: Output Power Control to better than ± 3 W of set value.
  • Burst & Sweeping with custom defined settings.
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTICS
Class of Operation Class B
Frequency of Operation / Frequency Stability
13.56 MHz center. Adjustable within 13.3 MHz to 13.8 MHz / 0.005%
RF Power Output / RF Power Margin 650 Watts into 50 Ohm / 28%
Gain (as amplifier) 60 dB @ 1,000W ±1 dB
RF Input Drive
(as amplifier)		 Recommended +1 to +3 dBm for the best operation
Input Drive Source (amplifier) Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
Input and Output Impedance
 50 Ohm
Input VSWR 1.2:1 max
Output VSWR 3:1 max
Output VSWR Protection 300 W max reflected power limit. Automatic,
limits typically within 0.5 ms after reverse power reaches 300W or power amplifier current preset limit.
Harmonic level @ 1,000W
 Better then - 40 dBc for 2-nd harmonic, any other > -55 dBc
Spurious Output - 76 dBm equivalent noise level generated by internal circuits
Mismatch Power Output

Forward power reference to rating:
1 kW nominal into 1.1:1 VSWR
1000W FWD, 500W Load into 2:1,
500W FWD, 320W Load into 3:1
330W FWD, 125W Load into 9:1
Dynamic Power Range 0 to 1 kW, settings within +/- 3W
RF Input / Output connectors

Input BNC Female
Output N Female
Rear Panel
Power Source 90 - 240 VAC, 47 - 63 Hz, broad input voltage with no adjustment required.
Power connection IEC Standard Power Entry
Cooling Forced air, temperature controllable, heatsink temperature monitored via RS232 GUI Interface
Dimensions (with hardware) H135mm x W112mm x L445mm ( 5.25” x 8.3” x 17.5” )
Weight 13kg, 25.8 lbs.
Mounting Half Rack, 2U high. Optional: Rack Mount Kit, Adapter Kit, Coupling Screws.
BURST Operation Min burst ON time 1 us, min burst repetition time 1ms. User settings via GUI and RS232 port. Activation from GUI only.
SWEEP Operation 13.3 to 13.8 MHz. Min time 10 ms, max 10s. Settings and activation from GUI only.
RF Output Settings Front Panel EDITOR,
RS 232 port from GUI,
hardware port 10V scale
Output Blanking For pulsed applications, amplifiers and generators offer blanking of the output signal for minimum noise RF spectrum
Operating Temperature 10° to 40° C ambient air

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]