All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters
LF HF RFI LINEAR AMPLIFIER & POWER GENERATOR
LF HF EMI Plasma Linear Amplifier Power Generator up to 1000 W

AG 1015 LF / HF Linear Amplifier and Power Generator
Amplifier EMI RFI Plasma. LF HF Linear Amplifier Power Generator 
AG 1015 LF / HF Linear Amplifier and Power Generator is a low frequency air-cooled amplifier with
built-in DDS oscillator.
It is suitable for ultrasonic, laser modulation, RFI, EMI, plasma and general industry and laboratory applications.



 

  • Typical output: 10 kHz to 2 MHz up to
    1000 W into 50 Ohm

  • Linear output: 400W at h3 =<-20 dBc

  • Power Meter: Digital Meter, measures
    forward and reflected power

  • Data acquisition: analog port for status
    monitoring and power measurement.
    Compatible with typical Data Acquisition cards

  • AGC or power leveling: feature for gain
    control of ±0.5dB

  • RS232 communication: full control of all
    amplifier and generator functions

Amplifier Model AG 1015 is a robust source of RF power for ultrasonic, laser modulation,
RFI/EMI, plasma generation, laboratory and general industrial applications.
Featuring leading edge solid state design for all RF amplifier stages and a built-in DDS signal
source, it provides everything for a complete and reliable, controlled RF power delivery
system. 
It reflects the our ongoing commitment to provide RF power products of the highest quality, incorporating the current requirements for complete remote control and data acquisition features
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class "A"
Frequency of Operation 10 kHz to 6 MHz
RF Power Output 50 Ohm load:
Up to 1000W for 20 kHz to 2 MHz
Up to 750W for 10kHz to 4 MHz
Up to 400W for 10 MHz to 6 MHz
Pulse and low duty cycle!
Any load:
Up to 400W, continuous operation
Gain 60 dB @ 1000W / 1MHz
+/-1.5 dB 20 kHz to 2 MHz
-2 dB drop: 10kHz to 20kHz and 2 MHz to 6MHz
RF Power Input Drive Typical range -30 dBm to 0 dBm, +5 dBm max
RF Power Input Drive for AGC Recommended -5 dBm to 0 dBm for +/-0.5 dB gain flatness
Input Drive Source Signal or function generator, analog computer output capable of up to 1 Vp-p @ 50 Ohm (+5dBm)
Input range: -30 to 0 dBm typical, +5 dBm max
Internal RF Source DDS oscillator: 10 kHz to 6 MHz, 1 kHz resolution
 
Input and Output Impedance
50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR
Output VSWR Protection 250 W max. reflected power limit for load impedance > 50 Ohm. Current level protection for Load Impedance < 50 Ohm.
Harmonic level @ 400 W: Better then - 20 dBc for 3rd harmonic,
any other > -30 dBc
@ 950W: -14 dBc
Spurious Output - 26 dBm equivalent noise level generated by internal circuits
RF Output Settings & Control -Front Panel EDITOR and function switches for manual control,
-RS232 port for GUI or other computer communication. Rear Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W. Rear Panel.
Output Blanking For pulsed applications, amplifiers and generators may offer blanking of the output signal for minimum RF spectrum noise.
BURST Internal settings: Pulse range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description for more details.
SWEEP Operation 0.01 to 6MHz. Min time 10 ms, max 10s. Settings and activation from GUI only
RF Connectors BNC Female: RF In
HN Female: RF Out
AC Power Source 200-240 VAC, +/- 10%, 47-63 Hz, No adjustment required.
AC Power Connection See manual for details
AC Input Current (RMS) RF Out nominal 400W: I<10A @ 220V
RF Out max 1000W: I<16A @ 220V
Cooling Forced air, temperature controlled, heatsink temperature monitored via RS232 GUI interface.
Acoustic level 45 dBa @ Max Fan Speed @ temp.
Case Designed to meet EMI and RFI shielding requirements AL chassis, yellow conductive finish.
Dimensions (with hardware) (H 405 x W 520 x L 470) mm ( 16” x 20.5” x 18.5” )
Optional Half Rack, 3U High.
Weight 59 kg, 130 lbs.
Mounting Stand alone unit. (Optional Rack Mount Kit)
Environmental Conditions Temp: 10°C to 35°C
Humidity: 80%

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]