LF HF LINEAR AMPLIFIER AND POWER GENERATOR
LF HF Linear Amplifier and Power Generator

AG 1017L LF HF Linear Amplifier and Power Generator.
Laser Ultrasonic Amplifier. LF HF Linear Amplifier and Power Generator.
AG 1017L is a low frequency air-cooled amplifier with built-in DDS oscillator. 
It is suitable for ultrasonic, laser modulation, RFI/EMI, plasma and general industry and laboratory applications. Up to 500 Watts RF Power From 10 kHz to 10 MHz 
AGC or Power Leveling: Gain Control to better than ± 0.5 dB
Pulse and Sweep of RF internal signal generator. Gated Blanking of output (OPTIONAL)

  • 0 kHz to 4 MHz up to greater than 500 W

  • 10 kHz to 10 MHz, 200 W

  • Linear Output of 200W h3£ -20 dBc

  • Digital Meter, measures forward and
    reflected power

  • Front Panel Control of Amplifier and Generator functions

  • Data acquisition: Status Monitoring & Power Measurement at Analog Port

  • RS232 communication: Full Control Of
    Amplifier & Generator Functions

Amplifier Model AG 1017L is a robust source of RF power for ultrasonic, laser modulation, RFI/EMI, plasma generation, general laboratory and general industrial applications.
Featuring leading edge solid state design for all RF amplifier stages and a built-in DDS signal
source, it provides everything for a complete and reliable, controlled RF power delivery system.
It reflects the our ongoing commitment to provide RF power products of the highest quality, incorporating the current requirements for complete remote control and data acquisition features.
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class A to 200 Watts
Frequency of Operation 10 kHz to 10 MHz
RF Power Output 200 W from 0.01 MHz to 10 MHz of continuous linear output into any load.
Up to 500W max from 0.2 MHz to 4 MHz, 50 Ohm load only.
Pulsing and low duty cycle only!
Gain 53 dB @ 200W / 1MHz
+/-1 dB 10 kHz to 10 MHz (50W Out)
RF Power Input Drive Typical range -20 dBm to 0 dBm, +5 dBm max
RF Power Input Drive for AGC Recommended -3 dBm to 0 dBm for +/-0.3 dB gain flatness
Input Drive Source Signal or function generator, analog computer output capable of up to 1 Vp-p @ 50 Ohm (+5dBm)
Internal RF Source DDS oscillator: 10 kHz to 10 MHz, 1 kHz resolution
 
Input and Output Impedance
50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR
Output VSWR Protection 100 W max. reflected power limit
Harmonic level @ 200 W: Better then - 20 dBc for 3rd harmonic,
any other > -28 dBc
@ 250W: -15 dBc
Spurious Output - 26 dBm equivalent noise level generated by internal circuits
RF Output Settings & Control -Front Panel EDITOR and function switches for manual control,
-RS232 port for GUI or other computer communication. Rear Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W. Rear Panel.
Output Blanking For pulsed applications, T&C amplifiers and generators may offer blanking of the output signal for minimum RF spectrum noise. Less than 1 mu Rise/Fall time
RF Power Meter accuracy +/- 3% typical
BURST Internal settings: Pulse range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description for more details.
SWEEP Operation 0.01 to 15MHz. Min time 10 ms, max 10s. Settings and activation from GUI only
RF Connectors INPUT BNC Female
OUTPUT N Female
Rear Panel
AC Power Source 100-120 VAC, 200-240 VAC, +/- 10%, 47-63 Hz, No adjustment required.
AC Power Connection IEC Standard Power Entry followed by RFI filter. Filter range 0.1 to 30 MHz min
AC Circuit Protection Internally fused on the main DC Power Supply, 15A
AC Input Current (RMS) RF Out nominal 175W: I<8A @ 115V/ I <4A @ 220V
RF Out max 300W: I<14A @ 115V/ I < 7A @ 220V
Cooling Forced air, temperature controlled, heatsink temperature monitored via RS232 GUI interface.
Acoustic level 45 dBa @ Max Fan Speed @ temp.
Case Designed to meet EMI and RFI shielding requirements AL chassis, yellow conductive finish.
Dimensions (with hardware) (H 178 x W 363 x L 388) mm ( 7” x 14.25” x 15.25” )
Optional Half Rack, 3U High.
Weight 25 kg, 54 lbs.
Mounting Stand alone unit. (Optional Rack Mount Kit)
Environmental Conditions Temp: 10°C to 35°C
Humidity: 80%

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]