AG1024 LF GENERATOR AND POWER LINEAR AMPLIFIER 
Ultrasonic Generator and Power Linear Amplifier

AG1024 LF Ultrasonic Generator and Power Linear Amplifier.
Amplifier Ultrasonic. AG1024 LF Ultrasonic Generator and Power Linear Amplifier.
AG 1024 LF Ultrasonic Generator and Power Linear Amplifier offers up to 2,000 Watts RF Power for Industrial, Laboratory, and Medical Application.

AGC or Power Leveling: Gain Control to better than ± 0.5 dB
Controllable internal DDS signal source

  • 20 kHz to 1 MHz up to greater than 2000 W

  • Output of 2000 Watts h3£ -20 dBc.

  • Digital Meter, measures forward and 
    reflected power

  • Data acquisition: analog port for status 
    monitoring and power measurement.

  • Front Panel Control of Amplifier and 
    generator functions

  • RS232 communication: full control of all 
    amplifier and generator functions.

SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class "B"
Frequency of Operation 20 kHz to 1 MHz
RF Power Output 50 Ohm load:
Up to 200W for 20 kHz to 1MHz,
Up to 1000W for 1 MHz to 2 MHz
Up to 400W for 2 MHz to 3 MHz
Pulse and low duty cycle!
Any load:
Up to 1800W continuous operation
Gain 63 dB @ 2000W /0.5 MHz
+/-1.5 dB 20 kHz to 1 MHz
RF Power Input Drive for AGC Recommended -5 dBm to 0 dBm for +/-0.5 dB gain flatness
Input Drive Source Signal or function generator, analog computer output capable of up to 1 Vp-p @ 50 Ohm (+5dBm)
Input range: -30 to 0 dBm typical, +5 dBm max
Internal RF Source DDS oscillator: 20 kHz to 1 MHz, 1 kHz resolution
 
Input and Output Impedance
50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR
Output VSWR Protection 400W max reflected power limit for Load Impedance > 50 Ohm.
Current level protection for Load Impedance < 50 Ohm
Harmonic level @ 1750 W Better then - 13 dBc for 3rd harmonic,
any other > -20 dBc
Spurious Output - 26 dBm equivalent noise level generated by internal circuits
RF Output Settings & Control -Front Panel EDITOR and function switches for manual control,
-RS232 port for GUI or other computer communication. Rear Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W. Rear Panel.
BURST Internal settings: Pulse range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description for more details.
SWEEP Operation 0.02 to 1 MHz. Min time 10 ms, max 10s. Settings and activation from GUI only
Output Blanking For pulsed applications, amplifiers and generators may offer blanking of the output signal for minimum RF spectrum noise.
Less than 1 mu Rise/Fall time.
RF Connectors BNC Female: RF In
HN Female: RF Out
AC Power Source 200-240 VAC, +/- 10%, 47-63 Hz, No adjustment required.
AC Power Connection See manual details
AC Input Current (RMS) RF Out nominal 1800W: I <30A @ 220V
RF Out max 2000W: I <35A @ 220V
Cooling Forced air, temperature controlled, heatsink temperature monitored via RS232 GUI interface.
Acoustic level 45 dBa @ Max Fan Speed @ temp.
Case Designed to meet EMI and RFI shielding requirements AL chassis, yellow conductive finish.
Dimensions (with hardware) (H 405 x W 520 x L 470) mm ( 16” x 20.5” x 18.5” )
Optional Half Rack, 3U High.
Weight 59 kg, 130 lbs.
Mounting Stand alone unit. (Optional Rack Mount Kit)
Environmental Conditions Temp: 10°C to 35°C
Humidity: 80%

 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]