All ProductsAnalyticalAnalyzersCalibratorsHumidityData LoggersLight MetersMeasurement

  

MultimetersOhmmetersPressureStandardsTemperatureTransmitters
AG1048 LF AMPLIFIER GENERATOR
AG1048 LF Amplifier Generator

AG 1048 LF Ultrasonic Generator and Power Linear Amplifier and Generator.
AG 1048 Ultrasonic Generator and Power Linear Amplifier and Generator offers up to 4000 Watts RF Power From 20 kHz to 1 MHz for Industrial, Laboratory, and Medical Application.
AGC or Power Leveling: Gain Control to better than ± 0.5 dB
 
  • 20 kHz to 1 MHz up to greater than 4000 W
  • Digital Meter, measures forward and
    reflected power
  • Data acquisition: analog port for status
    monitoring and power measurement.
  • Front Panel Control of Amplifier and
    generator functions
  • RS232 communication: full control of all
    amplifier and generator functions.
  • AGC or Power Leveling: Gain Control to
    better than ±0.5  dB
  • Controllable internal DDS signal source
  • Pulse and Sweep of RF internal signal
    generator.
SPECIFICATIONS
DESCRIPTION RANGE/CHARACTERISTIC
Class of Operation Class "B"
Frequency of Operation 20 kHz to 1 MHz
RF Power Output 50 Ohm load:
Up to 4000W for 20 kHz to 1MHz,
Up to 2000W for 1 MHz to 2 MHz
Up to 800W for 2 MHz to 3 MHz
Pulse and low duty cycle!
Any load:
Up to 3600W continuous operation
Gain 63 dB @ 4000W /0.5 MHz
+/-1.5 dB 20 kHz to 1 MHz
RF Power Input Drive for AGC Recommended -5 dBm to 0 dBm for +/-0.5 dB gain flatness
Input and Output Impedance 50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR
Output VSWR Protection 600W max reflected power limit for Load Impedance > 50 Ohm.
Current level protection for Load Impedance < 50 Ohm
Harmonic level @ 1750 W Better then - 13 dBc for 3rd harmonic,
any other > -20 dBc
Spurious Output - 26 dBm equivalent noise level generated by internal circuits
RF Output Settings & Control -Front Panel EDITOR and function switches for manual control,
-RS232 port for GUI or other computer communication. Rear Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W. Rear Panel.
BURST Internal settings: Pulse range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description for more details
SWEEP Operation 0.02 to 1 MHz. Min time 10 ms, max 10s. Settings and activation from GUI only
Output Blanking For pulsed applications, our amplifiers and generators may offer blanking of the output signal for minimum RF spectrum noise. Less than 1 mu Rise/Fall time.
RF Connectors BNC Female: RF In
"N type" Female: RF Out
AC Power Source 120-240 VAC per phase/neutral rating, 47-63 Hz, Back panel.
Automatic range switching
AC Input Current (RMS) RF Out nominal 3600W: I <44A @ 220V
RF Out max 4000W: I <50A @ 220V
Cooling Forced air, temperature controlled, heatsink temperature monitored via RS232 GUI interface.
Cooling Forced air, temperature controlled, heatsink temperature monitored via RS232 GUI interface.
Acoustic level 45 dBa @ Max Fan Speed @ temp.
Case Designed to meet EMI and RFI shielding requirements AL chassis, yellow conductive finish. Front Panel: off-white. Cover: black.
Dimensions (with hardware) (H 927 x W 533 x L 520) mm ( 36.5” x 21” x 20.5” )
Optional Half Rack, 3U High.
Weight 136 kg, 300 lbs.
Mounting Stand alone unit. (Optional Rack Mount Kit)
Environmental Conditions Temp: 10°C to 35°C
Humidity: 80%

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]