|
ATN-5 AUTO TUNER NETWORK
|
|
|
ATN-5 ICP Auto Tuner
The ATN-5 ICP Auto Tuner is designed to match the
impedance of the load coil while maintaining 50 Ohms of reactive
impedance to the RF Generator. During ignition and final tuning the
match will vary over
a small impedance range causing ionization of the argon or other
gas.
Upon ionization a more dense plasma will form and the Auto Tuner will
adjust to couple the impedance match. Capacitors range until a null is
seen in the detector circuit of the auto Tuner.
|
|
| Our
Price: |
Contact us for
pricing |
| Phone:
|
253-927-6186
866-318-6186 |
| Fax:
|
253-927-6189 |
| email:
|
sales@hotektech.com |
|
|
|
|
|
|
|
The complete unit is separated into two enclosures.
The
PT-II-CE is the controller unit and Auto Tuner is the impedance matcher.
Both units are enclosed in aluminum, with the Auto Tuner being yellow
irradiated for conductive ground purpose.
The Matching network contains an Air Variable Capacitors for tuning and
load.
The unit is considered "L" shape configuration which gives the
Auto Tuner direct coupling to Plasma effect.
This is the most efficient method for power transfer in RF.
The controller in an all self contained power supply and servomotor
control unit.
The front panel has controls for both manual and auto modes. It also
provides ignition preset potentiometers for efficient lighting and
tuning of the Plasma Process.
|
|
SPECIFICATIONS
|
| DESCRIPTION |
RANGE/CHARACTERISTICS |
|
P&M
Detector
|
| Frequency
of Operation |
13.56 MHz
|
| RF
Power Rating |
Up to
1000 W |
| Impedance
Rating |
50 Ohms
|
|
Matching Box |
9 W x 16 D x 5 H |
|
Input
Connector |
N Type |
Cooling
|
Air |
|
|
|
PT-II-CE Controller
|
|
Electrical
Power Required |
110-240
VAC |
Electrical Power
Consumption
|
45 Watt
|
|
AC Power
Connector |
6DEI EMI Filter |
|
Dimensions |
8 W x 9 D x 1.5 H
|
|
|
|
