| DESCRIPTION |
RANGE/CHARACTERISTICS |
| Class
of Operation |
A |
| Frequency
Range |
Amplifier
“A”: 100 Hz to 1MHz; +/- 2dB, 200 Hz to 800 kHz +/- 1dB
Amplifier “B”: 1 MHz to 450 MHz, +/- 1.5 dB |
| RF
Power Output |
10 W
linear for “A” and “B” in mid band |
| Gain |
40 dB,
+/- 1.5 dB each |
| RF
Power Input Drive |
-10 dBm
to 0 dBm (1 mW) typical, +5 dBm max |
|
Input
and Output Impedance |
50
Ohm |
|
Input
VSWR |
1:2:1
MAX |
|
Output
VSWR |
3:1
MAX |
|
Load
Mismatch |
Load VSWR = 8:1
All phase angles with no degradation in power output
|
|
Frequency
Band Switching |
Control
via isolated base BNC connector on the back panel.
TTL /CMOS
compatible signal for selecting operating amplifier module.
Low Level SLCT IN (0V) or SLCT Open – amplifier “A”
High Level SLCT IN (5V to 12 V) – amplifier “B” |
|
Harmonic
level @ 10 W |
< -
30 dBc , -20 dBc or better for third harmonic |
|
Spurious
Output |
Greater
than –50 dBc |
|
RF
Input / Output connectors |
“N”
type Female on rear panel |
|
Power
Source |
AC
Input: 100 to 120 VAC / 200 to 240 VAC, 50/60 Hz |
|
Power
connection |
EMI /
RFI Filter with IEC Standard Power Entry |
|
Cooling |
Forced air
|
|
Dimensions
(with hardware) |
H 95 x W 480 x L 419 mm, (H 3.75" x W
19" x D 16.5")
|
|
Weight |
~ 8 kg, (18 lbs.)
|
|
Mounting |
Stand
alone unit. (Front panel fits rack mount) |
|
Case |
Front
Panel and Cover: Platinum |
|
Operating
Temperature |
0°C
to 40°C |
