Toll Free: 866-436-2430                     Email: sales@hotektech.com

  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

STEP UP TRANSFORMER IMPEDANCE MATCHING

Most RF Power Sources are designed and optimized to deliver power into an impedance of 50 Ohms. 
In a power delivering system where the source and load impedance differs by more than 2:1, 
a matching element can improve efficiency.

We offer a variety of LF Band matching transformers for high and low impedance load applications.

The table below presents some standard impedance ratios.
SPECIFICATIONS
Z IN Z OUT IMPEDANCE
RATIO		 CONTINUOUS PWR INPUT
(Without cooling)		 MAX.PWR INPUT PEAK VOLTAGE
50 Ohms 200 Ohms 1 : 4 100 W 300 W ~ 560 V p-p @ 200 W
50 Ohms 450 Ohms 1 : 9 100 W 300 W ~ 840 V p-p @ 200 W
50 Ohms 800 Ohms 1 : 16 100 W 300 W ~ 1120 V p-p @ 200 W
50 Ohms 1250 Ohms 1 : 25 100 W 300 W ~ 1400 V p-p @ 200 W

 

ENCLOSURE W 4" x L 4" x H 3" (104 mm x 102 mm x 76 mm)
Deep-Drawn Enclosure, ZERO Corp., #Z64-64A
 
CONNECTORS 1 : 4 and 1 : 9 -- BNC Input/Output
1 : 16 and 1 : 25 -- BNC Input/Output HV Connector
 
 
 

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]