|
DESCRIPTION |
RANGE/CHARACTERISTIC |
|
Class of Operation |
Class B |
|
Frequency of Operation |
20 kHz to 800 kHz |
|
RF Power Output |
Up to 500 W CW mode over frequency range
of 30 to 800 kHz, into 50 OHm load. |
|
Gain |
57 dB @ 500W / 0.5 MHz set point
ą1.5 dB 30 kHz to 800 kHz |
|
RF Power Input Drive |
-15 dBm to 0
dBm typical range, Up to +3 dBm max |
|
RF Power Input Drive for AGC |
Recommended - 2 dBm to 0 dBm |
|
Input Drive Source |
Signal or function generator, analog
computer input capable of up to 2
Vp-p @ 50 Ohm |
|
Internal RF Source |
DDS oscillator: 20 kHz to 6MHz, 1 kHz
resolution |
-
Input and Output Impedance
|
50 Ohm (Optimized for 50 Ohm !) |
|
Output VSWR Protection |
100 W max. reflected power limit |
|
Harmonic level @ 300 W |
-17 dBc or
better for 3-d
- 22 dBc or better for any other |
|
Harmonic level @ 100 W |
- 17 dBc or
better for 3-d
- 22 dBc or better for any other |
|
Spurious Output |
- 50 dBc
equivalent noise level
generated by internal circuits |
|
Output Blanking |
For pulsed applications,
ULTRA 06-800
amplifier offers blanking of the output
signal for minimum noise RF
spectrum.
T off time ≤ 10 µs,
T on time ≤ 10 µs
TTL Low - RF Output Blanked,
TTL High - RF Output present, normal
operation. |
|
RF Connectors |
BNC Female: Back Panel |
|
AC Power Source |
200 - 240 VAC, +/- 10 %, 47 - 63 Hz |
