Toll Free: 866-436-2430                     Email: sales@hotektech.com

  
 
Instruments, calibrators, standards, analyzers, dataloggers. analyzers
 
  Test measurement instrumens. Analytical instruments, ph meters, dissolved oxygen meter, hygrometer, salinity meter, weather instruments. Power analyzers, Gas combustion analyzer, Electronic load, Harmonic analyzer. Pressure calibrator, deadweight tester, temperature calibrator, current loop calibrator. Temperature datalogger, humidity datalogger, barometric pressure datalogger, wireless datalogger. Hygrometer, humidity datalogger, HVAC instrument, humidity controllers transmitters. Candela meter, Luminance meter, Radiometer, Albedometer, Luminance transmitter. Cable detectors, coil tester, insulation resistance, resistance bridge, tachometers. Digital multimeter, clamp on meter, amperometer, current meter, high line voltmeter, phasing sequence meter.  
  Resistance bridge, ohmmeter, insulation resistance meter, multimeters, milli ohmmeter, micro ohmmeter, megohmmeter. Manometer, Pressure gauge, deadweight tester, pressure pump, vacuum pump, pressure calibrator. Simulator, Calibrator, resistance standard, resistor decade, inductance standard, thermometry standards. Thermometry bridge, precision thermometer, infrared thermometer, temperature calibrator, dry block calibrator. Current transmitter, Luminance transmitter, energy transmitter, pressure transmitter, temperature transmitter.  
 

Search  

 
 
 

AIR VELOCITY TEMPERATURE METER
 

435-1 Multifunction Instrument. Anemometer, Velocity Temperature Measurement
testo 435-1, multi-functional meas. instr., for A/C, ventilation and Indoor Air Quality, with battery and calibration protocol.
The measuring instrument for ambient air conditions, for assessing Indoor Air Quality and adjusting and inspecting VAC systems. testo 435-1 is an affordable introduction to measurement engineering for ambient air conditions. The new IAQ probe measures Indoor Air Quality by measuring CO2 level, air moisture and air temperature.
 Multifunction Instrument Anemometer Velocity Meter
Our Price: Contact us for pricing
Phone: 253-927-6186
866-318-6186
Fax: 253-927-6189
email: sales@hotektech.com

Temperature and humidity measurement is integrated in the new thermal probe. In addition, it is also possible to connect additional temperature probes. Readings from up to 3 temperature probes can be displayed in the clearly laid-out measuring instrument display; data transmission is radio-controlled, therefore wireless. Measurement data is printed on site on the Testo printer.
Storage temperature -30 to +70 °C
Operating temperature -20 to +50 °C
Probe type Typ T (Cu-CuNi)  
Meas. range -200 to +400 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type NTC  
Meas. range -40 to +150 °C
Accuracy ±0.2 °C (-25 to +74.9 °C)
±0.4 °C (-40 to -25.1 °C)
±0.4 °C (+75 to +99.9 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type Type K  
Meas. Range -200 to +1370 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type CO2  
Meas. Range 0 to +10000 ppm CO2
Resolution 1 ppm CO2
Probe type Absolute pressure probe  
Meas. Range 0 to +2000 hPa
Resolution 0.1 hPa
Probe type humid. sensor, cap.  
Meas. Range 0 to +100 %RH
Resolution 0.1 %RH
Probe type Hot Wire  
Meas. Range 0 to +20 m/s
Resolution 0.01 m/s
Probe type Vane  
Meas. Range 0 to +60 m/s
Resolution 0.01 m/s (60 vane)
0.1 m/s (16 vane)

Please email sales@hotektech.com or call 253-927-6186 if you are interested in a purchase, or
  need additional information.

[Home] [Top] [Distribution] [Contact Us]